Compatibility between CP100 and E classic MFD series
Hello, We have a costumer that has two E80 MFD connected to a DSM 300 sonar module throught a E55058 SThs switch, can we change the DSM 300 by a CP 100 sonar module? Is the CP 100 compatible with E...
View Articleannoying waypoint alarm
Hi I have multiple MFD's at two locations two C120 classics and a ES78. They are interfaced together and connected to my auto pilot. If I am following a route on my ES78 as I approach a way point the...
View Articlee120 updated now NO data source
I have just updated the SW and now I have no DSM info. I get the NO DATA SOURCE now. Everything was displaying proper prior to the MFD update. I have also updated the DSM as well. I have done the...
View ArticleHeading Sensor Vector Overlay
I have the EVO2 heading sensor and the GS165 MFD. I can't get the Heading sensor vector to overlay on the chart. I can get the COG vector to overlay, though
View ArticleEv-100 wired to 1199 Hummingbird
Hi Chuck, Just received my cables ST1 Adapter cable 3-pin and Hummingbird AS HHGPS. I've been told I have to cut/splice the 2 ends together ? I've bared the wires on the ST1 adapter cable and see 1...
View ArticleC-80 Display Buttons Back Lighting
The back lighting for the buttons only illuminate while the unit is first turned on and spooling up. Once the screen saying to push "OK" comes on the back lighting of the buttons go out. The same thing...
View ArticleReservoir hydraulic fluid level in Type 2 Hydraulic Linear Drive
I have a Type 2 hydraulic linear drive (81200) that I purchased back in 2005. I am finally finishing the install and need to mount the reservoir and noticed that the fluid level sticker has fallen off...
View ArticleClik here to view.
Strange radar return
12k pedestal with a 6 foot array. All setting in unit set back to factory. Still getting this odd return. Any ideas? Thanks image.jpeg (Size: 72.08 KB / Downloads: 2)
View Articleax7 series MFD alternate transducers
Looking for more detailed info on what "older style" depth transducers the a67 can be directly connected to, presumably using the E66066 adapter cable, or other converter. Have several sailboats using...
View Articleconnecting a78 to NMEA network
I have a a78 and it's connected to a Seatalk ng converter. I'd like to get the engine date from my Evinrude E-Tec displayed on the MFD. Will the following work: a Raymarine SeaTalk NG Backbone Cable to...
View ArticleST6002 Autopilot failure "no pilot seatalk failure" alarm
My RS130 GPS failed this week and an alarm on my ST6002 autopilot screen showed "No Pilot Seatalk Failure". The LED on the GPS antenna showed a red and orange alternating blinking LED, not the normal...
View ArticleDodge Mode with p70r autopilot
I recently installed and sea trialed my new p70r / EV-1 autopilot system. I am used to a very old Raymarine autopilot (used the ST5000 head with fluxgate compass) which had a "dodge mode" feature. In...
View ArticleAIS 650 with Plotter E80
Hello my name is Federico Katzenstein, and I´m from Uruguay. I going to US next month and want to buy a Raymarine AIS650. In my boat I have a Raymarine E80 multifunction display (plotter) with VHF...
View ArticleRayMic A46051 replacement cable
I have the the A46051 RayMic designed for use with a Ray55 and have bent the pins on the connector cable; is there a part number for a replacement number?
View ArticleClik here to view.
Some SR100 weather features not working while others are working
If having issues with some of supported SR100 weather features not working while others are found to be working, the problem may be rooted in low satellite signal strength (check the signal strength...
View ArticleEs lighthouse chart upgrade issue
Hi I updated my es7 yesterday by downloading updates to a new sad card then installing card in slot 2. It loaded and things work. However whenever I restart the ES7 it goes thru a data validly check ,...
View ArticleGPS not Working on ES178 and ES129 today
Have a 128 and 127 networked together. Powered up this am before leaving OB for ACT and worked for a couple of minutes then Lat and long coordinates started changing rapidly then no gps. The 128 is...
View ArticleRigging a new boat
I've been using another brand for some time now with what I consider marginal results. Obviously the side scan function on the unit didn't have enough power output to get a real good picture of what...
View ArticleCorrupted file in software download
Okay, I downloaded the A98 update that begins with R17. Unzip place in 8 GB mini card and place in actual unit. Start get to updates and the unit reviews files and uploads. Comes back corrupt file....
View ArticleCommissioning S3G and Type 2 Hydraulic Linear Drive
I have an older S3G Course Computer and a Type 2 Hydraulic Linear Drive. In the Commissioning manual there is a section on setting the drive type. There are 3 drive types; Type 3 (Linear, Rotary, I/O),...
View Article