EVO 100 wheel pilot connection to B&G nema 2000
I have recently purchased an EVO 100 wheel pilot (sail) and am just finishing the install. The wheel pilot needs to be connected to an existing B&G Triton instrument package (speed / depth / wind)....
View ArticleConnecting older and newer MFDs with HS5 Switch
Can an E120 MFD "communicate" with an ES98 MFD via an HS5 SeaTalk Network Switch?
View ArticleC120W Issue
When I have my radar on, my GPS screen remains fixed on the original area I started from. My boat icon will literally move up and off the screen rather than being centered. When I put my radar off, my...
View ArticleClik here to view.
which radar cable is this?
I recently purchased an eS98 MFD and I am planning the installation/connections. The radome is a RD418HD as far as I can tell (I have zero documentation on it). I'm guessing the cable in the photo is a...
View ArticleQuick Disconnect Button?
Hi, I have an EVO-400 with a pair of P70R controllers, one for each helm. I think it would be useful to have a way to quickly disconnect "go to Stby" for the pilot while underway. Reaching for the...
View Articleconnecting other namufacturers NMEA 2000 compliant devices to the Seatalk ng...
I have the EV-1 autopilot with the P70R controller. I have connected a Garmin GPSMap 527xs to the Seatalk ng backbone. This GPS is NMEA 2000 compliant. The Garmin GPS chartplotter recognizes all the...
View ArticleDisplay of AIS information on MFD chart
I Have a Ray 70 VHF with AIS connected to my A 128 MFD, is there any way the ais ship name and speed be displayed always when the chart is on? or a simple way access this info?
View ArticleeS98/Quantum
I've installed a new aS98 and a new Quantum but the radar isn't talking to the eS. I used the data cable and have good power to the unit. The eS doesn't recognize the Quantum. What am I doing wrong?
View ArticleDSM300 no depth digits - bottom appears to plot correctly
Despite having sent back my DSM300 IN 2014 it once again doesn't seem to send depth numerically to E80s. The fishfinder page looks about right for bottom display but also shows nothing numerically....
View ArticleST6001+ NMEA and HSB2 SeaTalk interface
Hi, First post to the forum and I’ll start with apologies for the length of this note. I’m attempting to put together a bit of a hybrid. We have two boats with Raymarine electronic gear. The one I’m...
View ArticleI60 wind direction problem
I installed an I60 earlier this year and for the most part it has worked well. The last few days, however, the wind has been a bit stronger (15 - 25 knots) and the close haul repeater display has...
View ArticleEV 200 Compass heading variation
The compass value is significantly different than the GPS or fluid filled unit. Sometimes it is 60 to 70 degrees different. The only time it is close is when heading south at 180 degrees. After viewing...
View ArticleQuad view not working
Hello, I have a large plotter network that includes 6 non-Raymarine ONVIF IP cameras. The plotters are able to display the cameras without a problem displaying them one by one. The quad view doesn't...
View ArticleI need an old E80 classic software
I have a E80 classic MFD that runned ok under software v3.22 I updated to v5.69 , made de factory reset ,it works but . . . Ais lost comunications and doesn't recover and radar can't get the antena ....
View ArticleSR150 Power
I have an SR150 received but NO power cable. I'm connecting to a classic E120 MFD via Raynet to RJ45 connector. I'm unable to find the power cable ANYWHERE and it's different from the SR100 cable I...
View ArticleST2000 and TackTick NMEA 0183 Problem
Hi, 30' keelboat with existing TackTick network (wind, depth, speed, etc.) including NMEA interface. This is linked with a VHF DSC and a Garmin 720 plotter. I installed an ST2000 tiller pilot and fed...
View ArticleWireless Wind Instruments
I bought a new wireless masthead transmitter two years ago. At first, it worked fine but then it began to transmit irregularly. It will work, then no reading, then work again. There seems to be no...
View ArticleDepth display flashing
I'm interested to learn why the depth being displayed on my I70, e95 and autopilot flashes and occasionally goes blank. In shallow water; approx. 40 feet or less the depth seems to be accurate however;...
View ArticleClik here to view.
Fuel usage problem
Hi I'm having trouble with my e127 not reading my NMEA2000 Offshore systems fuel level tank sender. I know the MFD sees it but I can't select its PGN number. The fuel manager seems to default to...
View Articlesetting waypoints
How do I set a waypoint on my C127 MFD. Is it the same process as my old c120.
View Article