Troubleshooting hsb2 communications
Raymarine's hsb2 Pathfinder Series Radar, Chartplotter, and Fishfinder The following troubleshooting steps should be undertaken when troubleshooting hsb2 communications. - Verify that all Pathfinder...
View ArticleReplacing hsb/hsb2/SL Pathfinder Series Display(s) with an a/c/e/eS/gS-Series...
If replacing a hsb/hsb2 Pathifnder Series Display, then all hsb/hsb2 Pathfinder Series Displays within the system must be replaced to permit the displays to share radar imagery, fishfinder imagery,...
View ArticleUsing the latest Navionics chart cards with an A/C/E-Series Classic MFD
When using currently available Navionics cartography, it it is strongly recommended that that the MFD be updated with the latest available Raymarine product software updates. A/C/E-Series Classic MFDs...
View ArticleAdding a C/E-Series Widescreen MFD(s) to a network featuring E-Series Clasic...
Unfortunately, C/E-Series Widescreen MFDs may not be interfaced to an Ethernet (SeaTalkhs/RayNet) network which also features E-Series Classic MFDs. While it is possible to interface an E-Series...
View ArticleInterfacing a Raystar 130 GPS Sensor to a a/c/e/eS/gS-Series MFD
It is recommended that the new a/c/e/eS/gS-Series MFD be upgraded with latest available Raymarine product software updates. Any Raymarine products featuring a 1st generation SeaTalk interface which do...
View ArticleWill the new CPT100 DVS work on A98 MFD
I have an A98 and am using the CPT100. The break away bracket is broken. I saw that there is a new CPT100 DVS transducer; with what appears to be a better bracket. Will the new transducer work on the...
View ArticleDragonfly 4 Pro w/ update 12.09 not working properly
I have had my Dragonfly 4 Pro since November of last year. No issues at all with it. I did the update to v. 12.09 and then my problems started. Depth only works around 10mph and below, if I go above...
View ArticleTesting ST60
So, I have nothing showing on my ST60 (new to me, so I have no idea what I am doing) The center of the screen, looks kinda brown. I removed from the boat to bench test with my 12v power supply. I...
View ArticleES9 Interface with ST6001+
I have a ST6001+ autopilot with a linear drive. Will this unit interface with the ES9, via ST to STng converter and allow of AP from the ES9? Thanks in advance!
View Articlerepave st60+ with i60
I currently have the ST60+ on my sailboat. I would like to replace it with the i60 wind. The question I have can I plug the old wind machine at the top of the mast directly into the new i60 wind...
View Articleauto pilot replacement
I have a 43 sailboat that has a Raymarine Smart Pilot S2G AST driving a linear ram. I would like to replace this with the EV-1 system. I looked at your price list and I believe the T70161 will do the...
View ArticleFusion RA 205 Connection to SeaTalk ng
What cable (s) are required to connect a Fusion RA205's NMEA 2000 port to the SeaTalk ng backbone so I can control the Fusion audio with an e125 running LH 15?
View ArticleAdding EV 200 Autopilot
I'm adding an EV 200 hyd package with a Teleflex Smartstick Rudder reference to my 2008 Pursuit 315OS. This is the equipment that is currently installed on my boat: Raymarine E120 Raymarine Gyroplus...
View ArticleWhy did I get a standard SD card with my new A98?
I just bought a new A98 MFD with preloaded lighthouse vector charts, packaged inside the box is a Lighthouse charts SD card, why? The MFD only accepts micro -SD, what am i supposed to do with the...
View ArticleInterfacing a Fusion stereo head unit to an a/c/e/eS/gS-Series MFD
Fusion True Marine stereo head units are manufactured with Ethernet and/or NMEA 2000 communications interfaces. For maximum performance, it is recommended that Fusion stereos featuring an Ethernet...
View Articleconnecting Uniden 380 VHF to A98 MFD
How do I connect my new A98 to my Uniden 380 VHF? Which wires go where?
View ArticleE7 MFD without cartography
I recently purchase a new boat which has an e7 MFD without cartography (model E62354). I am a bit confused about "without cartography" . Does this mean that the unit simply does not have the chip...
View ArticleInterfacing a DSC VHF radio via NMEA 0183 to an a/c/e/eS/gS-Series MFD
NOTE: As the colors of the NMEA 0183 leads of DSC VHF radios differ from manufacturer to manufacturer and often from model to model, it will be necessary to consult your DSC VHF radio's...
View ArticleBundled cartography options for a/c/e/eS/gS-Series MFDs
The memory of Raymarine's a/c/e/eS/gS-Series MFDs is not and can not be pre-loaded with cartography. The Chart application of these MFDs is dependent upon the presence of a compatible LightHouse,...
View ArticleUpdates
Just want to be clear on updating. When I download the new ver 16 for my e7 does that also update the other peripherals on the system? Evolution autopilot, AIS 650, HD Radar. If not can I download...
View Article