SeaTalk NG to NMEA connections
I purchased the i70 instrument package for my sailboat mostly to add wind data but also to get 2nd depth sounder as the current one is old and could go soon. The boat has a SIMRAD AP11 autopilot. I'd...
View ArticleSwitch panel not attached on E125
I just received a factory refurbished e125 two days ago. Pulled it out of the box and the piece containing all the buttons on the right side of the display is not attached. There seem to be some (not a...
View ArticleClik here to view.
Fluxgate M81190 connection to S1 computer
I am trying to replace the fluxgate compass on my boat. I have the S1 computer and I just purchased a used M81190 fluxgate compass. The old connector coming from the S1 has several wires, meanwhile the...
View ArticleST-HS
I have a ST-HS network. Will this connect directly to an ES128 or do I need a Raynet(M) to ST-HS adapter cable? I'm replacing a Classic E120 and do not have the ES128 yet so I cannot see the back of...
View ArticleClik here to view.
es 75 MFD to be installed and upgrading older ST70 autopilot
Purchased new / es75 MFD. I have existing ST70 auto that has wiring to ST70 instuments via black/Blue wire, - in photo - adding new i40 bidata instument (that only has sea talk flat 3 wire connection....
View ArticleX10 autopilot with P70R? Yes? No?
I'm looking to upgrade to an existing and functioning autopilot and wondering if a P70 can be added to a system that already has a ST70 control head. I want to add a second station on the STNG network,...
View ArticleC97 with C95
I have a C97 system with radar, fish finder, autopilot, and a Raymarine VHF with AIS. If I add a C95 at another location will it have all the same functions as the C97? Or do I need to add another C97?
View ArticleGX2200 AIS to ES75 MFD
Saw some posts regarding networking the Standard Horizon GX2200 to the ES75. Am I missing something or can I simply use a R70414 cable to go from the GX2200 NMEA 0183 out to the ES75 NMEA 0183 in?...
View Articlemoving the cursor on an a78 MFD
On my new Raymarine a78 MFD in Chart mode: Is there a way to move the cursor across the chart instead of moving the chart to the cursor?
View ArticleRL70C not communicating with RC631
Hello, On my 2003 Sailboat new to me I have at the nav station: RL70C Radar Plus = Says Raymarine on boot - V2.09 ST60 Tridata ST60 Wind 400G Course Computer ICOM IC-502 At mast Raymarine Radome - not...
View ArticleDSM300 transducer problem
I have a question about my DSM300 and P319 through hull transducer. I think I know the answer, but just want to double check. At first, my DSM300 wasn't communicating with the E120 multifunction. I got...
View ArticleDual DSM's on the boat
My question is can I run 2 DSM30's on the network? I have dual E80 classics with SR100, DSM30 and the Raymarine network switch. I have 2 transducers in the hull and was wondering if I can hook up a...
View Articlewifi on seatalkHS/NG
Is there a wifi module from Raymarine that will allow wifi from my tablet to my legacy (E80 classic) mfd network?
View Articleeci 100
I have an Evinrude Etec with a NEMA 2000 plug. Is the ECI 100 the "backbone" I need to interface the Etec with my A98?
View ArticleE Classic series Seatalk 2 port
Hello, We have a costumer with an E80 Multifunction display and we need to know if the seatalk 2 port is working, where can we find the pinout of this port? I found the NMEA 0183 and Seatalk pinout in...
View ArticleWi-Fi communications with legacy MFDs.
Raymarine did not produce mobile apps for the following retired MFDs: - C-Series Classic MFDs - E-Series Classic MFDs - A-Series Classic MFDs - C-Series Widescreen MFDs - E-Series Widescreen MFDs -...
View ArticleES128 GPS not reading external GPS ant
I have a new Raystar RS130 connected but my unit says internal GPS. If I turn off internal, it says no GPS fix. I did try restarting unit with internal turned off and it still says no GPS fix..... How...
View ArticleIdentifying whether a display has hsb or hsb2 communications circuitry
The following Pathfinder Series Radar, Chatplotter, and Fishfinder Displays feature neither hsb nor hsb2 communications circuitry and have accordingly been designed for single station/single display...
View ArticleE80 Classic and E90w interfacing
Can I share data between a classic E80 MFD and the wide E90w on the same bus? Will they talk to each other with the same Raymarine products on the same raynet?
View Articlemax size CF card for E80
What is the maximum size CF card the E80 Classic can accept? The reason I am asking is I have a 64k card with navionics on it and it reads fine. I transferred the navionics to a 2G and also an 8G CF...
View Article