When using currently available Navionics cartography, it it is strongly recommended that that the MFD be updated with the latest available Raymarine product software updates. A/C/E-Series Classic MFDs were designed and tested for use with Navionics Gold, Platinum (not Platinum Plus), and HotMaps chart cards. These retired MFDs were not tested with Navionics chart cards containing more than 2GB of nautical charts (not to be confused with 3D chart, sonar charts, aerial overlay charts, etc.). While the A/C/E-Series Classic MFDs may support reading cartography from Navionics Gold, NAV+, and Platinum Plus chart cards having memory capacities as large as 16GB, it is our experience that chart cards containing more than 2GB of nautical charts stored on the chart card may increase screen redraw times, and/or cause the MFD to reboot, and/or not be able to be viewed by the MFD. Prior to purchasing a new chart chard for an A/C/E-Series Classic MFD, it is recommended that Navionics be contacted to verify that the specific chart card being considered has been tested with your model of A/C/E-Series Classic MFD. As the NAV+ chart cards are pre-populated by Navionics with more than 2GB of charts, it is recommended that the NAV+ chart card's Nautical Charts be deleted and replaced with less than 2GB of nautical charts using the Navionics Chart Installer application.
CRAFAQ#
CRAFAQ#