DSC VHF radio / AIS Class B transceiver via NMEA 0183 to an...
NOTE: As the colors of the NMEA 0183 leads of combination DSC VHF radio / AIS transceivers differ from manufacturer to manufacturer and often from model to model, it will be necessary to consult your...
View ArticleClik here to view.
too much signal on my Dragonfly 5 Pro
Hi, I get too much signal on my newly installed Dragonfly Pro 5 Pro (see attached pictures). It does not look as a correct behavior and I am looking for an advice to what might be a cause and how to...
View ArticleAutopilot heading display units can't be reset
I have a Raymarine ST70. I had a constant disparity between my Ritchie compass and the Autopilot heading displayed of about 25 degrees. I have been able (by removing a metal step and multiple other...
View ArticleAdditional product updates included within an a/c/e/eS/gS-Series MFD update file
As of v12.26, the Raymarine a/c/e/eS/gS-Series MFD software update zip files now include software update files to update many other, but not all, Raymarine products which have been interfaced to the...
View ArticleCAM200 Wideangle Adapter
I have a CAM200 mounted as a rear cam on a SeaRay DA510. The angle of view is very narrow and is unable to show the full width of the aft. Is there a wide-angle adapter available for the CAM200?...
View ArticleRD418HD mounting info
I have a RD418HD mounted directly to a hard top with no mount. My customer would like to mount a LED light bar in front of the dome. The question I have, what is the maximum height of equipment mounted...
View ArticleCP570 with Airmar R109C LHW
Hi, I have been some troubles to install Airmar R109C LHW with CP570 module. The problem is the R109 comes with bare wire cables and CP570 needs a 11 pin connector. So I bought a Raymarine 11 pin...
View ArticleWhat type drive unit
How do I determine if my existing drive unit is a Type 1 or Type 2 Short? My boat displacement is less than 20,000 pounds.
View ArticleClik here to view.
DSM 30 Sounder - B117 Transducer Issue
I have a customer with a C90W (v2.20), DSM 30 (v4.20) and B117 transducer (E66014). There are two issues: 1. Even though the fishfinder display shows a good bottom lock, the depth data window shows no...
View ArticleST60+ anchor alarm
What is the difference between "shallow alarm" and "shallow anchor alarm" on my ST60+ ?
View ArticleInterfacing EV-400 autopilot to E 80 classic
I am replacing my Smartpilot with a new EV-400 Sail autopilot. I have an E 80 MFD as a data master connected to a E 120 MFD as a repeater through seatalk hs. My st60 instruments and gps are connected...
View ArticleA98 communication to old Raytheon products?
Getting prepared to take the plunge on purchasing the A98 MFD. Am hopeful but doubt it will communicate with my old stuff that came with boat. Raytheon R10XX radar? SportPilot+ autopilot? Just curious...
View ArticleAdapting / repairing / splicing transducer cables
Raymarine neither recommends nor supports adapting transducers which have been designed for use with third party fishfinding products. Similarly, Raymarine neither recommends nor supports adapting...
View ArticleSeatalkng/NMEA2000 Power
I am just finalizing a new dual MFD Raymarine system using two es128 MFDs. I have also installed a Maretron NMEA backbone system to support monitoring all the engines, weather, etc. My first question...
View ArticleReplacement for E85001 PC/SeaTalk/NMEA 0183 Interface Module
The E85001 PC/SeaTalk/NMEA 0183 Interface Module was retired several years ago, and Raymarine has not introduced a replacement for this device. For applications where the system additionally includes a...
View ArticleRadar mounting height / angle
The vertical beam angle of a radomes and open array radar scanners is 25 degrees (12.5 degrees above and 12.5 degrees below horizontal). Failure to account for this vertical beam angle may cause...
View ArticleRaymarine S1000 compatibility
I just bought a 2005 boat with C80 MFD and a S1000 Auto-Pilot. I am think about replacing the old C80 MFD with a new A-series or E-series MFD. Are there any compatibility issues I need to be aware of?...
View ArticleRaymarine Backbone to B&G
I have a Ray backbone connected to Wind, AP, Depth and Speed What do I need to add to connect my B&G Zeus? Thank You
View ArticleGear Up For 2016 Sales event
Boat 1 was non issue. Bought e7D MFD with sounder from marine dealer and forwarded bill, bar code from box and documentation per instructions. Boat 2 is more complicated. Combination is e7D and...
View Articleupdated, missing Raystar 130 data
I just updated to version 16.47 and also updated the Acu 200 1.13to its latest version within 10 minutes my Raystar 130 is no longer being received on my E165. The autopilots working perfectly also on...
View Article