AIS targets read as radar targets
I have a Standard Horizon GX2200 providing AIS data to my Seatalk NG system via an Actisense NG-1-ISO-AIS translator. The AIS targets show up on my chart plotter but I have a problem controlling the...
View ArticleReplacing the UniController's rotary/trackpad button membrane of a C/E-Series...
Replacing the UniController's rotary/trackpad button membrane of a C/E-Series Widescreen MFD The UniController's rotary/trackpad button membrane of a C/E-Series Widescreen MFD is responsible for...
View ArticleSearching for FAQs within this Forum
Searching for FAQs within this Forum User's of this Forum are reminded that membership within this Forum is not required to perform searches within the Forum for threads and FAQs (search string...
View ArticleAdditional Guidelines For Forum Use
Additional Guidelines For Forum Use Please click here to view a FAQ addressing this subject. RAYFAQ#
View ArticleDragonfly 7 pro transducer
I'm installing a dragonfly transducer under the setback step on a Ranger 520VX with the trolling motor/step bracket......I don't need readings at speed...this transducer has the cable coming out the...
View ArticleUpdating to a newer display screen
Hello, I currently have a C80 multifunction unit attached to a Raymarine Radar and a Smart pilot ST8002 Raymarine auto pilot. I would like to upgrade to a larger display, but I don't know if the newer...
View ArticlePlot barometric pressure over time
Hi Chuck, I see that there's already a feature request in for plotting temperature over time. If this is implemented, it would be nice if it applied to other environmental variables on the N2K network,...
View ArticleRadar/Plotter Bearing Mode
I have e127 and e125 networked MFDs with the e127 as master. The e127 is used as the chart plotter in North up mode and the e125 as the radar display in Head up mode. A data box is set up on the chart...
View ArticleAuto Pilot Upgrade
Hello - I am looking to upgrade my autopilot from the current S3/ST6002+ to a new Evolution AP and would to confirm that the ACU200 is the correct unit. Here are some more details: Current RM...
View Articlea78 Multi-Function Display
Hello, I bought Raymarine a78 Multi-Function Display. I have adapted the A80171 version of the P319 fishfinder transducer transducer to be interfaced to the DSM300. To connect a78 on the DSM300's...
View ArticleSeatalk hs connect to slave mfd
I have a fusion 750 that I would like to control from the MFD's but I only have a Seatalk HS plug available on the slave MFD (I don't have a network switch and would like to avoid it). Can I plug the...
View ArticleAutopilot to mfd
I am having a couple of issues with my Raymarine system. The system was installed here in Panama and had been working fine till the autopilot control head died. The system consists of 2-e125's (MFD's),...
View ArticleSea Talk Configuation
I have installed a Fusion AV 750 sound system which has a NEMA 2000 connection and compatible with remote control from my c97 MFD. I have a SeaTalk backbone installed with all three white connections...
View ArticleDSM300 outputs
I have a DSM300, an E90W and a C70. If I connect the C Cable output to the C70 and the RJ-45 output to the E90W at the same time, will the DSM300 output on both or will there be a conflict?
View ArticleAdding spur sockets to an existing SeaTalkng backbone
Adding spur sockets to an existing SeaTalkng backbone There are a number of ways to add spur sockets to a powered and properly terminated SeaTalkng backbone. Should the backbone feature T-Pieces, then...
View ArticleSimultaneously interfacing a DSM30/300 to a C-Series Classic MFD and another MFD
Simultaneously interfacing a DSM30/300 to a C-Series Classic MFD and another MFD The DSM30 & DSM300 differentiated themselves from the DSM250 (preceeded the DSM30 & DSM300) and the CP370 &...
View ArticleCannot shut off AIS silent mode to off
Good Morning , I have tried to search FAQ for the answer to a dead end My AIS silent mode stays on all the time and I cant switch it to off. This has been since I bought he E127. I read the AIS silent...
View ArticleSharing GPS signal from a70d
Hi I have a raymarine a70d which can receive a gps signal and a c70 which cannot by itself. Can I share the gps signal from the a70 with the c70? If so, how do I have to connect them? Thank you Andrea
View ArticleVHF RAY218E
Hello I can't listen to the weather forecast from NOAA on my channel 1 to 10 on my Ray218E VHF. I checked on my manual and there is no solution about that. The only thing I can see about this problem...
View Articlea98 mounting gasket
I am moving my electronics around and found that there is no gasket behind my flush mounted a98 mfd. Could you please provide the part number for this and where would I get one. Thanks.
View Article