Interfacing a C-Series Widescreen MFD to a PC running RayTech software
The following recommendations apply to customers interfacing RayTech RNS software to a system featuring C-Series Widescreen MFDs which have been updated with v2.35 C-Series Widescreen MFD software....
View ArticleIs RayTech RNS / Planner 6.x software compatible with Windows 10
RayTech RNS 6.1 / 6.2 software continues to be supported for use with Raymarine products when in used conjunction with a PC running the Windows XP, Vista, and Windows 7 operating systems. RayTech...
View ArticleE80 Classic to RNS 6.2
I am trying to interface an E80 Classic display to RNS 6.2 (on a Windows 10 laptop, via wifi). The primary motivation is to display radar images on a small tablet that I can carry around the boat. I...
View ArticleHelp w A128 touchscreen freezing
I have an A128(primary) and A98. They are tied into the network using a HS5 network switch which includes CP370, RD424HD raydome, SR150, RMK-9 remote. Also have the seatalk ng network for the fusion...
View ArticleUpgrading from DSM 300 to CP370
Upgrading from existing DSM300 to CP370. Can I use my existing DSM 300 power cable with new CP370? Thanks, Steve
View ArticleQuantum radar with current MFD
I am buying a boat that has 2 MFDs. I'm not certain about the model numbers but 'E120W' and 'hybridtouch' are on the bezel. The other, a smaller unit, only has 'hybridtouch' on the bezel and shows...
View ArticleECI-100 Reset
Hi - I've changed the drive system of my sailboat and my ECI-100 is giving me fault codes not in the fault code list (STNG solid green, DeviceNet cycles 7 red blinks followed by solid red). The manual...
View ArticleConnecting two a-series MFDs
My first post here, looking for assistance networking a couple MFDs. I have an a78 with transducer and power attached, currently running on my dash. I'd like to add an a67 display to my instrument...
View Articleswing arm mount for a95 MFD
Any recommendations on website, brand. model, etc. for an articulating swing arm mount for a a95 MFD for my sailboat? It will be mounted inside an opening window in the cockpit and then it will swing...
View ArticleNMEA connection
I had a c120 unit. I replaced it with a C127 unit. Since the switch my Ray 49 VHF radio had not worked properly, no weather stations , it does not transmit or receive. My question is I have a NMEA...
View Articlehow to identify Drive type 1 or 2
I have a Linear drive but can't tell if it is a Type 1 or Type 2 short. How can I tell?
View ArticleAdding an MFD?
Hello, I have a RayMarine system on our boat, with an e95 MFD, Digital Radar, Evolution AP, ST60 instruments (with converter) etc. It's working fine, but I am considering adding an additional MFD -...
View ArticleRF drain to bonding plate (in common with SSB?)
We are installing some new equipment (autopilot, MFDs, wind speed depth, radar) and note that the RF drains should be connected to a bonding plate - according to Chuck's FAQ - 'What should the drain...
View ArticleeS78 MFD
I'm using an eS78 MFD with a CPT-120 through Hull Transducer. Both installed in spring of this year. Will the CPT-120 alone be enough to maximize the results of the eS78 or do I need another transducer...
View ArticleE120 Classic NEMA 0183V Output Sentences
I have an E120 Classic MFD and I need to know what the NEMA 0183 outrput sentences are because I want to add a Comnav 1420 autopilot that requires any or all of the following sentences: Below is the...
View ArticleST60+ with C120/80 Classic MFD adding DSM250
I have an existing 2006 boat with ST60+ Depth, and transducer E26030, (an airmar D800 / P17) network to C120 and C80 classic MFD I wanted to add fish finding capability using a DSM250. 1.) is the...
View ArticleMFD control of Rockford-Fosgate PMX-5
I purchased an ES78 MFD this summer and had it installed. I was thrilled to learn from Raymarine news posts that the unit could control the Rockford-Fosgate PMX-5 stereo, so I rushed out and purchased...
View ArticleClik here to view.
EV-1 location
I am looking for some help in deciding where to locate my EV-1 sensor. I have a Scout Abaco 262 and I am having difficulty identifying a location that will work. First - there is no place that is three...
View ArticleRotary Type 2 drive - 12 or 24V clutch
I'm installing a Evolution 400 pack to an existing Raytheon 100/300 type 2 rotary drive, about 15 years old. Just want to check that it is correct that the clutch voltage should be set to 12V even...
View ArticleE120
I am a new owner of an e120 and wish to find a basic tutorial or video to help me understand how to operate it. Thank you.
View Article