AIS data to two VHF radios
I have one AIS transponder that is connected to two E127's via NMEA2000 network. One E127 is at an upper helm with a VHF radio and the second E127 is at the lower helm with a second VHF radio. How do I...
View ArticleAirmar H2183 connection via STNg to slaved e95
I purchased the Airmar H2183 and will install into my current Raymarine architecture. I am running dual e95s, SR6 network, and one backbone kit. Based on my current software for the e95s (believe 14.xx...
View ArticleClik here to view.
Chart/Sonar Problem
I have a Dragonfly Pro7 which has developed an issue when using the chart/sonar option. The sonar portion is distorted. Sonar by itself is ok. Attached pictures show the issue before and after updating...
View ArticleClik here to view.
A98 ST50 ST60 Quantum Raystar 130 "suite"
Hello Charles, Very much appreciate the service you provide on this forum! I'm trying to set up a new "suite" of electronics for my boat. The boat presently has: - ST60 SmartPilot autopilot and...
View ArticleNew RayControl compatibility device list
I know you folks can't promise anything, but there's a lot of room for improvement/additions in your list of Android-compatible devices. Seems it's been a while since anything new has been added....
View Articlecompatability
I currently have an a78 mdcp (multi display chart plotter) and am hopefully, if I am on the good list, will be getting the ok to purchase the eS78 radar system. The a78 is mounted below and the eS78...
View Articlee95 vs. e97
What is the difference between the Raymarine e95 and e97? I don't know what the Sonar addition is for the e97. It does not appear to come with the transducer, so is it just the e95 with the capability...
View ArticleTwo MFD's and two VHF's
I have two E127's and two VHF radios. One E127 and one VHF is at the upper helm and the other E127 and VHF is at the lower helm. I would like to enable the DSC function on both radios. Each radio has...
View Article5-Way Connectors in series
Can two SeaTalk NG 5-Way connectors be placed in series provided the 5-Way units are connected to one another via backbone cable and properly terminated, etc.?
View ArticleClik here to view.
What could be wrong with my EV-100 autopilot?
There must be a simple answer to this. In short, the EV-100 AP (power version; no rudder reference) installed on my new boat works OK at low speed but has problems making course corrections to the...
View ArticleRaymarine upgrade
Upgrading electronics and have chosen Raymarine a97 with Digital HD Radar dome. Rep at Raymarine said I can use the same transducer by disconnecting the cable to the grey box and bypassing with a...
View ArticleClik here to view.
connecting CW-series with E-classic
I have a C90W and a C120W on the boat and want to add 2 E80 classic displays to the network. The CW series will be in charge of the radome and the DSM300, the E-series will display engine data and GPS...
View ArticleWhich Control head is a compatible replacement for the ST 6000+
I have a ST 6000+ that is acting erratically and would like to know if the ST 6001 or ST 6002 are compatible replacements.
View ArticleM81130Auto Pilot Siezed up
Good Morning , I have a 2007 ST6002 M81130 Type 1 linear drive 12v auto pilot and the drive arm seems to be seized up . I there a way to free this piston .? THANK YOU FOR YOUR HELP TOM
View ArticleWi-Fish App On Nonactivated Smart Phone?
Does a Dragonfly Pro 7 connect with and send sonar data to a non activated (no cell contract) smart phone which has the Wi-Fish app?
View ArticleSplitscreen sizes for eS MFD
When using the split screen mode on an eS90 MFD is it possible to change the size of the individual screens? I would like to use the 3 screen mode but would prefer that the two smaller screens be...
View ArticleST60 with SeaTalk to SeaTalkng converter
My a series MFD manual says that the ST60+ is compatible with your SeaTalk to SeaTalkng converter. Is the ST60 also compatible? Thanks, Chris
View ArticleAutopilot without rudder reference
I have an S2 autopilot with a p70 control head and a linear motor with a flux compass. Is there any way to make this unit work Without a rudder reference?
View Articlereplacement of RL80C
I bought a 2003 480 Sea Ray with all raymarine electronics which was great, but there is still a RL80C unit that is used for the radar readout and I would like to update to a new readout. There is a...
View ArticleSPX 30 Drive Stop Issue
Hi, I have a hydraulic autopilot motor (Lecomble &Schmitt) that is controlled by a SPX30 computer and a P70 control head (although I mostly control the pilot from an e127). Lately, the AP has been...
View Article