EV-100 system
Will an EV-100 system drive a type 1 pump? Also, is the EV-100 system available without the type 0.5 pump? Thanks
View ArticleAutohelm 100/300 autopilot
I understand that the eS127 supports the SG3 autopilot using the Seatalk to SeatalkNG converter. The existing Autohelm 100/300 and the SG3 autopilots both work perfectly with the ST50+ instruments and...
View ArticleDifference in series.
Looking at the E and ES MFD units. What is the big differences and is the E series still made ? Cant seem to find the E 70024LNC listed on your site ?
View ArticleAdvice on Sounder.
I upgraded my MFD from C120 Classic to E125. The C120 was connected to a DSM250 sounder and an Airmar Transducer B60-20. 1. Is the DSM 250 compatible with E125? If so, how do I do this? what adapters...
View Articleraytheon RC530
just bought a californian with a Raytheon RC530 chart plotter there is no navigation card. I cannot seem to find a card for it. Does anyone know where to get a card for north america that would fit...
View ArticleAIS bridging
Will a mfd running Lighthouse v17 send AIS data to a i70 gauge? I have a C97 MFD running Lighthouse v16 that is connected to an AIS receiver thru nmea0183 .The C97 will not send the ais to my i70. Will...
View ArticleBroken transducer bracket a second time.
Hello to all My bracket cracked where the bolt goes through on a dragonfly 5, i bought a new kit (transducer mount kit) i only needed the one part so it stung to pay for a whole kit when i only needed...
View ArticleUpgrade Ray70 to AIS Transceiver
Can the Ray70 VHF, which is AIS receive only, be upgraded to a transceiver by adding the AIS transceiver, or will this create problems? Can the same antenna be used and will the devices talk or...
View ArticleDifference between S2 NMEA ports
Hello - On my S2 (which is connected to a Navdata), I only get GPS data from NMEA port 2 (tx), NMEA port 1 tx is sending something, but its not GPS data. What is the difference between the two NMEA...
View ArticleDo Raymarine MFD's bridge AIS data from a NMEA 0183 talker to SeaTalkng?
Raymarine's a/c/e/eS/gS-Series MFDs and C/E-Series Widescreen MFDs are not designed to bridge AIS data received via their NMEA 0183 ports to SeaTalkng / NMEA 2000. As both Data Master...
View Articlesuppression ferrites
I'm installing a couple of eS78MFD's and notice that the power cables did come supplied with suppression ferrites, even though the diagrams in the installation manual show the ferrites in place. Do...
View ArticleClik here to view.
Installation of RF suppression ferrites
In some cases, Raymarine will recommend installation of RFI / EMI suppression ferrites, also known as RF chokes, to block RF emissions and support CE certification for marine electronics installed in...
View Articledeck stepped mast connection for quantum
Hi - we are installing a quantum radar on the mast and hooking it up to an e95. The mast is deck stepped and the mast is removed every year for winter. What kind of connector do I need to at the base...
View ArticleST50 Wind Display Testing Procedure
Hello - My ST50 wind display is not responding to wind direction. I've tested my masthead unit per the instructions and it looks correct. Is there a testing procedure for the display unit? Ideally I'd...
View Articlei50 Speed Transducer Replacement
I have to replace a defective i50 speed/temp transducer and would like to avoid running 30' of new transducer cable if possible. Does Raymarine have a cable connector kit available that would allow me...
View ArticleIn line fuse question
I am installing a new ap Autopilot EV 400 sail, es97 mfd, quantum radar and i70 instrument pack. I have read the wiring info in the post. I still have a couple of questions to ensure I am protecting...
View ArticlePlot or graph Temperature
I have 3 Es displays and a CP470. Is it possible to set up the display to graph or plot sea temperature over time?
View ArticleType 300 Course Computer 12V
My ST7000 failed, black screen, Dead! It was connected to a Type 300 Course Computer. Due to the ST7000 being obsolete I purchased a new ST8001 I was told it was compatable. When I power up It displays...
View ArticleLegacy RADAR
MY apologies in advance if this is has been covered elsewhere in this forum. I am trying to pair up scanners and displays from three legacy Raytheon RADARs but I'm having a heck of a time finding out...
View ArticlePathfinder RL80C Plus - No Chart Data
I bought a 1996 Sea Ray 370 Sundancer this summer. I used it several times with the above unit working flawlessly. I purchased a second C-Map chart for Georgian Bay as we were taking a 9 day trip out...
View Article