Canadian ENC Charts
What is the preferred way to load Canadian Hydrographic Service Digital ENC Charts into my Raymarine C-125 & Es-98 MFD. It seem they come on CD. Do I just copy them to the memory card the MFD uses?
View ArticleST50 Plus Tridata display speed is 50% low
I have a ST 50 plus tridata. Recently the boat speed reads about half of what the SOG (from GPS) reads. I have checked at slack tide and same problem. I just replaced the speed/temp transducer with a...
View ArticleCp470c problem
Hi My name is Geoffrey Dutton , have a problem with a customers system. He has two c Series displays connected to Radar and a CP470c sounder module. The system worked fine for a year or so then one day...
View ArticleEm-Trak B100 AIS and C80 Plotter
I recently bought a new boat, it came with an Em-Trak B100 AIS unit and a S100 Splitter which were not connected. I know nothing about connecting these things and the local contractor knew less! I have...
View ArticleAIS on i70
I have GX2150 VHF with AIS receiver communicating to my a128 through NMEA at 38400 and all is fine on the a128. i see the targets etc. The issue is that I want to see it in the i70 AIS display. The...
View ArticleDragonfly screen glare?
I have a Dragonfly 5 Pro fishfinder on my kayak. When it came out of the box, there was a clear plastic sheet protecting the MFD screen. I left this on in order to provide an extra layer of scratch...
View ArticleA68 (replaced A67) and older thru hull transducer
Until last month, my sailboat had a Raymarine A67 with an older transducer. I believe it is an Airmar B744V (possibly even a B44). The A67 died, and I found a grear deal on an A68 with no transducer....
View ArticleAllow setting i70 screens from an MFD
Evening, Seeing as it is already possible to group i70/p70 displays and control their brightnesss from one display, it seems a logical extension to be able to remotely change screens from another...
View ArticleFishfinder option C-80
My boat has a C-80 display installed by the previous owner. The boat has a pathfinder radar, GPS, Auto Pilot an ST-60 digital depth readout. All read through the C-80 with the exception of depth...
View ArticleVHF not showing GPS coordinates
My Ray55 VHF is no longer showing GPS position. It still communicates. It is in use on a sailing catamaran attached to an E120W chart plotter. The antenna is at the top of the mast. The connections are...
View ArticleConnecting PC to E120
Hello all, I am the new owner of an E120 system circa, 2008-9. I am trying to enable my licensed version of RNS 6.1 to work on my PC via ethernet cable connected to port 5 of the SeaTalk HS5 Network...
View ArticleClik here to view.
CHANGE C120W TO ES127
I am helping a friend and we have the following situation: Currently, the boat has installed the equipment shown in the attachment. He wants to replace the C120W for ES127, in the attachment shows what...
View ArticleClik here to view.
C120 and RS130 GPS Fix but no satellite status
Hello, Recently I had a problem when my C120 gps stopped working. The original RS125 was flashing red and I would get no fixed position. After verifying all wiring was good/ checking connections, and...
View ArticleAdding fishfinder features to a C-Series Classic MFD or hsb2 Pathfinder...
In order to add fishfinder features to a (C70, C80, C120) or hsb2 Pathfinder Series Radar and Chartplotter Displays (ex. RL70, RL70C, RL80, RC520, RC530, RC630, etc.), the display must be interfaced to...
View ArticleInterfacing an E-Series Classic MFD to a PC running RayTech software
The following recommendations apply to customers interfacing RayTech RNS software to a system featuring E-Series Classic MFDs which have been updated with v5.69 E-Series Classic MFD software. Please...
View ArticleConnecting a camera to a E120 series
I have an E 120 series and would like to purchase a camera to be mounted on the arch viewing the stern of the boat to help when docking. What camera if any would be compatible with the E 120 series.
View ArticleTesting the microSD card reader slot(s) of an a/c/e/eS/gS-Series MFD
Raymarine's MFDs are compatible with microSD memory cards having memory capacities up to 32GB. To test the microSD card reader slot(s) of an a/c/e/eS/gS-Series MFD, configure the MFD to save screen...
View ArticleWhat type of video camera may be used with E Classic and C/E Widecreen MFDs
The following MFDs are exclusive compatible with analog video sources support NTSC or PAL video formats: - E-Series Classic MFDs (E80, E120) - C-Series Widescreen MFDs (C90W, C120W, C140W) - E-Series...
View ArticleClik here to view.
Vektor setting and laylines
HI i have problems, getting it right even if i chose the setting calculate tide the vind direction isn't right the calculation is not calculated on COG but HDT se the 2 picture below on starboard it...
View ArticleAutopilot "X'd" Out in Data Bar
Chuck, when my E120 Classic was installed and interfaced to a Simrad Autopilot. I was told the Data Bar Icon would only work with a Raymarine Autopilot. Is this still the case? I have the latest...
View Article