Removal of marine electronics in preparation for winter layup
With the exception of those those devices which may be easily removed from the vessel, it is not a common practice for modern marine electronics devices to be removed from the vessel in preparation for...
View ArticleWithin a system of more than one MFD, what is the function of the Data Master?
One and only one MFD within the system must at all times of operation be configured as the system's Data Master MFD (HOME->MAINTENANCE->DATA MASTER). System settings (Data Source selections, boat...
View Articlereplacing st 40 depth and wind and also st50 speed
I would like to replace my existing instruments st 40 wind and st 40 depth with i60 wind and i50 depth and replace the st 50 speed with the i50. Can I use the existing transducers for each? Any other...
View ArticleReplancing Raypilot 650
I would like to replace my Raypilot 650 and conect the replacement to my existing Raymarine es78. What would be my best option? Thank you
View ArticleWill S3 Computer accept outside NMEA Heading?
Apparently a lightening strike got to my AIS (now back with Raymarine for repair) and my S3G Course Computer (dead SeaTalk and Rudder Reference inputs). 1) I have recently installed an Airmar Heading...
View ArticleE165 VS GS165 Screen
I'm looking to upgrade from my Classic E-120. I'm interested in the screen coatings on these units. My E-120 anti glare coating is 99% intact but its always a concern. The GS units seem to be more...
View ArticleData Source Selection
Are there any plans to allow data source selection on EVO autopilots when non Raymarine devices are part of the STNG/NMEA2000 network? I would really like to tell the EVO what to take route/track data...
View ArticleSeatalk2 to NMEA 2000
I have a NMEA device that I would like to connect to my C120 classic. I have an open Seatalk2 port on the back of the C120. Could you tell me what adapter cable I would need to hookup the C120 via the...
View ArticleFrozen screen on MFD a125
Hi Trying to connect to our Marina network, it froze the screen and I cannot do anything. The error message I am getting on the screen: "Unable to connect has issued an IP address which conflicts with...
View ArticleSmartPilot X10 NMEA output
Does the X10 output speed/wind/depth data on the NMEA 0183 interface? Speed/wind/depth are connected via ST. STng is not being used. I am trying to interface to a Garmin 4210 via 0183. Regards, Eric
View ArticleTransducer Compatibility
I currently have a Raymarine A70D installed that I will be replacing with an eS127 early next year. The transducer is a Airmar P79 #31-234-1-11 that has the #33-622-01 adapter cable connected to the...
View ArticleS100 Remote controller
My S100 will not link to the antenna. Changed the batteries. It will power up and search, if I push any button the remote shuts down.
View ArticleWhich a/c/e/eS-Series MFDs may the xducer from my A-Series Classic MFD be...
Raymarine and Airmar 50/200 kHz fishfinder transducers which had been successfully used with the A-Series Classic MFDs featuring internal 50/200 kHz fishfinder circuitry (A50D, A57D, A70D) may simply...
View ArticleRadar Mounting Options
Greetings, I'm looking at replacing my C80 plotter with a newer model, and adding Radar to my 38' sailing vessel (Quantum). From my discussions, there are two common options for mounting the Radome....
View ArticleM81167
I'm trying to find a picture with dimensions of this for installation purposes. Thanks for your help
View ArticleVoyage Planner Waypoint Entry Question
Hi All, On our trip up the East Coast from Ft Lauderdale to Annapolis (ICW & Offshore) I have been using the Navionics App to create routes and transferring them to the e125 in the cockpit and with...
View ArticleReplace C80 with e97 or es98?
The 'E' series are on a fire sale now with some vendors, and I'm thinking about replacing my C80 MFD with an E97. Does anybody have any advice on the C80 -> E97 swap? I'm thinking about the Es98,...
View ArticleMultiple Mfds to multiple iPads
I am considering two MFDs networked together. I believe that only one iPad or Android can be connected via wifi to a single MFD? If this is the case, if I have two MFDs networked together, can one MFD...
View ArticleAllow apps to connect to MFD when device and MFD are clients to the same network
Currently you have to join the the MFD's WiFi Access point to be able to use the Raymarine Apps (RayRemote, etc). My boat has an existing WiFi network which has better performance and coverage than the...
View ArticleSonar Chart Live
When running at speed my sonar chart live function creates a very dense, compressed line of depth lines and paints the area around them a light pink and/or tan. As a result my charts now are covered in...
View Article