C-80 to E-80 Classic
About 6 months ago, I started having problems with the C-80's power button. Some contact cleaner, cleared things out, until last week. The screen went blank, had to do a Factory Reset to bring it back...
View ArticleReplacing all electronics
I had a lightning strike on my Beneteau 445 and am replacing all of the electronics. I composed a post listing the products that I have purchased so far and asking for help with the layout and...
View ArticleClik here to view.
E125 Anomalies (includes Autopilot)
My Raymarine system consists of: • E125 MFD - V17.45-00403 • I70 (x4) – V3.05 • RS130 GPS – V2.20 • Ray 260 VHF – V2.030 • P70 – V3.05 • ACU-200 – V2.17 RSCP V1L4 • EV-1 – V2.17 RSCP V1L4 • Color HD...
View ArticleBacklight on Remote?
I have the Smart Controller remote for my autopilot and was wondering if the LCD display is supposed to have a backlight. Mine does not, and if it should I would like to return it for repair.
View ArticleAdded a DSM30 Sounder
I was running a P319 600W transducer straight to a Raymarine ST60+ Depth instrument with no problems. My chart plotter is a Raymarine C80 and I am using a Raymarine Smartpilot X30 autohelm, all on NMEA...
View ArticleP70r and Spx Autopilot
With current software in the P70R and an Spx-10, is it normal to have a grayed out option of "Restart XTE" on the P70R? I've seen it work paired to an evolution series, but wonder why it wouldn't work...
View ArticleAbrupt change in course
Once I set the autopilot (ST60) to a course, all is fine is I don't move from the wheel. If I physically move to the port side near where the instrument is mounted, the boat will abruptly change course...
View Articlee120
I have a radar rd218 2kw that was connected to a c80, but c80 damage. Now I would like to buy a friend a e120 widescreen. ¿I can use my old radar with this e120?
View ArticleE125 Boat Position Display
My Raymarine system consists of: • E125 MFD - V17.45-00403 • I70 (x4) – V3.05 • RS130 GPS – V2.20 • Ray 260 VHF – V2.030 • P70 – V3.05 • ACU-200 – V2.17 RSCP V1L4 • EV-1 – V2.17 RSCP V1L4 • Color HD...
View ArticleA65 Orginal Question
Hi, newbie to the forum and do appreciate all the great information provided. I was given an original A65 in like new condition and it seems to operate great. I updated the software to version V2.28...
View ArticleNavionics microsd chart not recognized
My e7d will not read my navionics chart chip in either slot. It was working last week. Is this a hardware problem?
View ArticleClik here to view.
Unable to view Nautical chart data from my Navionics chart card
It is recommended that the operational state of each of the MFD's microSD memory card reader slots be tested by attempting to capture the MFD's screen image to a microSD memory card (POWER->SCREEN...
View ArticleAIS 650 transmission in Canada
On a recent cruise in British Columbia, I noticed that my AIS 650 wasn't transmitting my vessel location; reception worked fine. (We noticed this via web sites such as MarineTraffic.com.) Here in the...
View ArticleEv 200 or 400
I have a 1990 Catalina 42 about 23000 plus lbs. I have an Octopus hydraulic actuator 1212Lam. Avg amp draw is about 4 to 6 amps max 19. Which raymarine auto pilot should I be looking at. Thanks.
View ArticleSupplying diagnostic data in support of investigating a problem with your system
Supplying diagnostic data can be very helpful, and in some cases is required, to support investigation of a problem with your Raymarine system. Systems featuring Raymarine's a/c/e/eS/gS-Series MFDs...
View ArticleClik here to view.
Diagnostics - a/c/e/eS/gS-Series MFD ETHERNET & SEATALKNG / NMEA 2000 DEVICES...
Supplying diagnostic data can be very helpful, and in some cases is required, to support investigation of a problem with your Raymarine system. Systems featuring Raymarine's a/c/e/eS/gS-Series MFDs...
View ArticleClik here to view.
Diagnostics - a/c/e/eS/gS-Series MFD Error Logs
The a/c/e/eS/gS-Series MFDs continuously log system performance data (found within the chronologically latest MFDPP_xxxx.log file) and should the system encounter a failure, then an additional log file...
View Articlea/c/e/eS/gS-Series MFD System Configuration Settings
It is considered a best practice to back up your system's configuration settings and data on a regular basis to prevent accidental loss. It is also considered a best practice to our system's...
View Articlea/c/e/eS/gS-Series MFD Waypoint / Route / Track Data
It is considered a best practice to back up your system's waypoint, route, and track data on a regular basis to prevent accidental loss. It is also considered a best practice to backup this data prior...
View Articlea/c/e/eS/gS-Series MFD Screen Snapshot
As the saying goes, often "a picture is worth a thousand words" in describing a problem with your marine electronics system. Accordingly, it is recommended that a screen snapshot be executed on the...
View Article