Short Raynet cable needed
Not sure if this should be listed under the Radar forum but this is what I need. We have a sailboat and would like to mount the eS97 at the wheel. I need a short F to M raynet cable 2m 3m to go down...
View Articlei40 Power Output for Depth Sounding
1/ What power output (Wrms) to the transducer do your i40 Bidata and Depth units produce? 2/ Also, my existing 6 blade paddle wheel might work even though it appears your i40 uses a 4 blade...
View ArticleGps position fix lost
I have a E120 connected to a new raystar 125 GPS antenna. The previous GPS antenna, a Raystar 120 of 2006 vintage,began to fail.The reoccurring problem is all is ok and then the alarm goes accompanied...
View ArticleRaymarine System Upgrade Recommendations
I have a 46' trawler with all Raymarine electronics. I started with an E120 MFD, and added a the radome scanner RD218. Then added a CAM 100, AIS 500, depth sounder that plays with the DSM30 and a...
View ArticleST60 wind display
I have a 12+ year old ST60 wind instrument and masthead transducer. The ST60 displays wind direction properly, but displays 0.0 for wind speed. I also have a ST60 graphic display at the nav station...
View ArticleUpgrading from SR100 to SR150
If I choose to upgrade from a SR100 to a SR150 with my chart plotter upgrade from an E120 to an Es127, can the antennas, power, and connection stay the same and the upgrade be a simple swap of the main...
View Articlechanging headine line color
i have a c140w & can i change the heading line (predictor line) color? Having a hard time picking it out. Thanks Clay Holick
View ArticleMicroSd Slot
I have an eS127 i just installed. I have a Navionics microSd card I placed in slot 1. I bought a new card for updates and data. I tried to load the card in slot 2. The number 2 mSd card slot is...
View Articlewi fi down vision
does anyone know if the wifi down vision setup will work with the CP200 side scan sonar system?
View ArticleBattery names
is it possible to change the names of the batteries on the Data page? I have 4 batteries that are monitored for V and amps, but battery 1,2,3,4 as names is not very descriptive. Would rather House,...
View Articlenavionics platinum + card
This past winter I lost my old cf navionics card so I bought a new 904+cf card. Well in reboots my classic e120 every 3 seconds and is useless. I have gone back and forth with Navionics, new chip...
View ArticleAdding second depth sounder
Hello, Can a second depth transducer be installed near DF6 transducer? I was looking to add a Hawkeye depth read out at rear of boat for convenience. It runs at 200khz. If so, how do I install so to...
View ArticleNew Micronet display with old TacTic system
I have a customer with a TacTic system with depth transducer connected wirelessly. The display has failed. Will a new Micronet display see the transducer and work properly?
View ArticleCan a Raymarine fishfinder transducer instead be used with depth/speed/temp...
Raymarine branded fishfinder transducers supporting the 200 kHz depth sounding frequency may alternatively be used with Raymarine branded instruments which are compatible with analog depth, speed,...
View ArticleES128 video out questions
I want to connect an external 12V powered 19" monitor via hdmi output from my ES128. (for viewing from back deck while fishing) I read in the installation manual that I need to purchase the 5meter...
View ArticleTesting a MFD's NMEA 0183 port(s)
A MFD's NMEA 0183 Port(s) may be tested by performing a wrap-around test. Example: to test a MFD's NMEA 0183 Port 1, the MFD NMEA Cable's NMEA IN+ lead will be interfaced to the MFD NMEA Cable's NMEA...
View ArticleVP created waypoints resulting in Name Conflict error
When importing Voyage Planner routes (ten routes) to c125, getting error message NAME CONFLICT. Searched in both user manuals for c125 and Voyage Planner, but neither mention Name Conflict as an issue....
View ArticleDS600X change out to es MFD
Can I get and adapter to use my Airmar traducer currently installed to use the sonar on my es MFD with built in sonar? I understand I will not be able to use the chirp, until I pull the boat and change...
View ArticleES9/Quantum
I'm not sure what has been done but I removed the eS9 due to storms but now the Quntaum will not power back up. It has power at both ends of the cable but won't power up. Can you help me figure this...
View ArticleReprogramming AIS 500
I am trying to reprogram my AIS 500 with a new MMSI number and boat name and details. The previous owner’s information remains in the unit after I add my details via the Raymarine software and the...
View Article