I have an eS127 i just installed. I have a Navionics microSd card I placed in slot 1. I bought a new card for updates and data. I tried to load the card in slot 2. The number 2 mSd card slot is designed to have the card placed into the slot with the metal "teeth" up. I tried for 20 minutes to get the card to slide in. I also removed the Navionics card from the top slot and tried to place it in the second slot. Both cards will slide in but will not "click" into place.
I went ahead and updated the software through the top slot. I noticed when I ejected either card in the first slot through the eject command, and pushed it in to release it the screen would freeze. I had to switch the power to the eS127 off using the circuit breaker to get the screen to work. I noticed the freeze issue after the update to the software to version 17.46. I am not sure if the two issues are relate so i listed them both.
I searched the database for an answer to the number 2 slot issue but couldnt find anything. Is this a hardware rpoblem? Is there anything i can do short of taking the eS127 out and sending in for warranty repair?
Thanks,
Nate
I went ahead and updated the software through the top slot. I noticed when I ejected either card in the first slot through the eject command, and pushed it in to release it the screen would freeze. I had to switch the power to the eS127 off using the circuit breaker to get the screen to work. I noticed the freeze issue after the update to the software to version 17.46. I am not sure if the two issues are relate so i listed them both.
I searched the database for an answer to the number 2 slot issue but couldnt find anything. Is this a hardware rpoblem? Is there anything i can do short of taking the eS127 out and sending in for warranty repair?
Thanks,
Nate