Lighthouse II map faded to black.
In tracking down another problem on my a98, the Raymarine tech download the newest v17 software in hopes its would be software corrected. All seemed fine for about 2 days, then the lines on the...
View ArticleE7D Data Import
When importing routes and waypoints from the Navionics app on my iPhone, the gpx file goes to a different location on one of two MSD cards each time I do an import. How do I define where to put the...
View ArticleDock to Dock waypoints list
After couple of tries I was able to create a dock to dock route. Had to first be sure I started in water a lot deeper than the minimum safe depth I entered for my boat. I named the route and saved it....
View ArticleDoes Cartography network to multiple displays?
My customer purchased new components a year ago which I installed and now he wishes to add additional functionality and new mfd's. The system installed last year included: EV200 Autopilot P70R control...
View Articlec/e-Series MFD's keypad is not firmly attached to my new MFD
The key mat of the c/e-Series MFDs is designed to float freely above the MFD's keyboard PCB. The left side of key mat is designed to be held in place by tabs on the key mat which slide under a lip on...
View ArticleMarpa issues
I have a new Quantum radar hooked up to an eS75. The Acquire Target option does not come up on the context menu when I select a target. The MFD is not hooked up to my AP. Does it need speed and heading...
View Articleis the p70 control head compatible with a 400 course computer?
I would like to install the p70 control head to replace my ST6000+ but am not sure if it is compatible. I read the forum message about compatibility with older course computers but it doesn't mention...
View ArticleDragonfly powers on
I just installed a Dragonfly 5 pro, why does the Dragonfly 5 power on when I turn on the battery isolator switch? Also, I just did the chart (Navionics) software upgrade - so many files are now on the...
View Articlewhich O ring do I use
I have a DST800 - I want to put the sensor into an existing airmar housing. I've made sure the sensors are the same length. The differences between the two are the lack of a gate and a notch at the top...
View ArticleNetworking a95 to non-Raymarine A/P
Hello, A friend just purchased a new a95 and I will be installing it for him as I have quite a bit of experience with ST, STng and a/e series plotters on my own boat. He has ST60 instruments and we...
View ArticleEvolution 200, VFH issue
Updated my AP to the newest version and fished Thursday and Friday last week, odd thing happened that has not happened prior to the update. While on track mode going to a waypoint the AP would...
View Article18" or 24" HD Radome?
I was all set to get the 18" HD Digital Radome and then I read that the 24" would be better because of the narrower beam width. I know it may be hard to quantify how much better it may be, but is it...
View Articleadding new instruments to an ST60 setup
I have a e95 chartplotter that I just added to my ST60 system. I was looking for some additional displays. Are the i70 display units compatible with the ST60 system?
View ArticleST60 Graphical repeater brightness
I have 2 st60 Graphical repeaters that are in line with an ST60 Tridata, ST60 wind instrument and a head unit for my autohelm 6000. The graphical repeater are very dim at night. I have tried them at...
View ArticleDragonfly 4Pro and DSC?
Can the Dragonfly 4Pro output DSC (digital selective calling) to VHF radio?
View Article48” Open HD Color Array Radar Issues With Lighthouse II software v17.45
Is there a known problem / patch planned in the near future to address an interface problem between the 48” open HD color array radar and Lighthouse II software v17.45? Although not checked with...
View ArticleSea Talk multiple equipments
I would like to know which exact Components will need to make a setalk interface between the following equipments : 1. Multidisplay A67 with transducer 2. Multidisplay A78 with radar and transducer (...
View ArticleE127 Transducer Dilemma
Deadrise angle measures 15.8 degrees as best as I can get.The B60 E66088 transducer is for deadrise of 8-15 degrees. The B60 E66087 transducer is for dead rise of 16-24 degrees. What do you do when the...
View ArticleAutohelm ST50 Depth Gauge Replacement
I need confirmation that my model 2096 0340067 Autohelm depth gauge can be replaced with a Raymarine i50 depth gauge without changing out the Autohelm transducer.
View ArticleClik here to view.
Saving waypoints error
I went to backup my classic E120 with the same compact flash card I have used for a long time and got this error. I tried to backup just a single track as well as all my waypoints and got the same...
View Article