Testing an instrument speed through water transducer
The following procedure may be used to testing an instrument speed through water transducer: - Verify that the transducer’s paddle wheel is free of marine growth and rotates freely on its shaft - Power...
View Article7'' e series vs. 7'' es series
Hi, I would like to buy a new Raymarine MDF. Can you explain me which are the differences between the 7'' "e" and "eS" series? Thanks for your help. Best Regards
View ArticleAutopilot Remotes
Notes on the Raymarine website about the IOS App indicate autopilot control does not include activating or deactivating the autopilot. You can infer from this you can change the course however in the...
View ArticleWaypoints: can't goto or show on chart
e7D with 17.45 software. If I am on a chart display and select Menu, My Data, Waypoints, and then select a Waypoint I can choose Goto, or Display on Chart and it works fine. If I try the same thing...
View ArticleConnecting to Horizon GX2200 AIS, GPS, DSC?
I was able to connect the AIS signal from my Standard Horizon GX2200 VHF to my e7D and can see all of the AIS data on the MFD (there appears to be a dedicated AIS NEMA 0183 line on the GX2200). While...
View ArticleDRIVE STOPPED troubleshooting
Hello all! A friend of mine has a large schooner with an Evolution autopilot system installed. The ACU is the ACU-200 (I believe) with a p70 display, driving a Jefa 200 Nm drive unit with a sprocket...
View ArticleStreaming error on a95
I am setting up the remote control app on my Samsung Table S2. I changed the default SSID and password on the a95 mfd. My tablet sees the network and logs in with the selected password. When I start...
View ArticleE120 Classic Periodic Restart
Hi, I have an E120 which restarts itself about once every two hours of run time. There is no apparent reason for these restarts, they are just random while running. I assume it's a voltage dip possibly...
View ArticleE127 will not boot after latest software update
I updated my E127 to the latest software and it will not boot. It goes into a cycle of giving the Raymarine screen then flashes the home screen top ribbon only and then restarts etc. I have reinstalled...
View ArticleMARPA and SHS
I’ve got a legacy installation consisting of two E80 displays, Raymarine GPS and radar, an S2 AP Course Computer, fluxgate compass, and an 8002 AP control head. The fluxgate is connected to the AP...
View ArticleQuantum radome not communicating with a/c/e/eS/gS-Series MFD
If previously paired to the Quantum radome, the MFD's Wi-Fi is configured ON, the power circuit supplying the Quantum radome is switched ON, and the MFD is unable to communicate with the Quantum...
View ArticleUsing AIS650/500 Silent Mode leads
The AIS650/500's silent mode leads are primarily intended to support placing the AIS transceiver into an out of silent mode within - systems in which the Raymarine MFDs have been switched OFF, yet...
View ArticleClik here to view.
Transducer In and Out / Broken Clip
I went out on Saturday and about half way through the day my A98 all of a sudden turned it self off or went out. I pressed the power button and it came back on and it started repeatedly indicating that...
View Articledodging obstacles while in Track mode (EV-200)
When the AP is in track mode, and I need to dodge an obstacle (e.g. lobster pot) I either put the AP in standby on use the +/-10 key. I will then put the AP back in track mode. To lessen the aggressive...
View ArticleAIS500
Hi, I recently added a new AIS500 to my all Raymarine system. AIS is working fine with one exception. When the AIS is on the boat icon on my C80 changes orientation while underway. The boat icon moves...
View ArticleS100 Remote Discontinued?
Has the S100 remote been discontinued and if so, is there a replacement planned? Thank you.
View ArticleS turning
I have installed a new EV-1, ACU-400 and p70R. When I go into auto, it holds a good course for about 20 seconds and then starts S turns up to 12 degrees port and starboard. I have not installed the B60...
View ArticleNo radar video on E120
Radar worked great last week, now I can't get any video display. Put the radar in 3nm range and ran a self test. I noticed that the Magnetron current is at 0 along the Magnetron heater has a fail code....
View ArticleC70
The C70 is showing only vertical lines on the screen. I'm assuming a loose ribbon cable connector but don't know. Is the unit still being repaired? What model would replace this and be compatible with...
View ArticleE127 software upgrade
I recently installed the software update via ad card as per instructions on your website. Everything installed and I put my original card back in and rebooted. When I am Attempting to build a route...
View Article