When I turn up from dead down wind, the reported true wind speed on my i60 increases several knots. Clearly this is not what is really happening on the boat. Any ideas what’s wrong? Thanks!
↧
[CA11] Instrument
↧
[CA11] e127 joystick
My e127 is.7 years old and functioning well.The joystick cursor control is getting loose however with more.play in it than the unit at the nav station which is used less.often.I would like.to replace.it becore.it.fails.Can you specify a.part.number.?
Thanks
Thanks
↧
↧
[CA11] E7D Annual over ground mileage reset
Hi,
I have an MF E7D and would like to know how to reset my annual mileage to 0.
I like to keep a log of total miles traveled each year and if possible how to setup miles traveled on each trip we take.
Thanks
I have an MF E7D and would like to know how to reset my annual mileage to 0.
I like to keep a log of total miles traveled each year and if possible how to setup miles traveled on each trip we take.
Thanks
↧
[CA11] Anemometer attachment to mounting arm
I have Raymarine forward standard arm wind transducer connected to a ST60 wind instrument. The adhesive attaching the transducer head to the mounting arm has failed which allows the head to slide and rotate on the arm. I'm still getting a speed and direction on the display so the transducer is still functional but, the head is at a 90 degree angle to horizontal so the direction is not correct. What type of adhesive should be used to reattach the head? I can tell there's an indexing point to ensure the proper horizontal alignment is achieved but, can't see any evidence of an epoxy or urethane type of adhesive. I don't believe it was assembled with an interference fit. The arm to the mast mount connector appears to have an epoxy as the adhesive.
↧
[CA11] RS150????
Ooookkkkkkk
I just bought a “new” 2018 Azimut and it has the Raymarine “Platinum” electronics package. (Gs165 MFD)
Now I learn I need the SR150 module for my SiriusXM weather.
Obsolete/discontinued/no longer available.
I hate to take no for an answer.
Anyone know how I can get my hands on one??
Thanks
T
I just bought a “new” 2018 Azimut and it has the Raymarine “Platinum” electronics package. (Gs165 MFD)
Now I learn I need the SR150 module for my SiriusXM weather.
Obsolete/discontinued/no longer available.
I hate to take no for an answer.
Anyone know how I can get my hands on one??
Thanks
T
↧
↧
[CA11] Upgrade to Axiom Pro
Current system is 5 ST60 instruments, wind,speed,depth,multi
300 auto pilot
ST6000 control unit (installed Aug 2000)
E120W
RD418 digital radar
GPS 150 sensor
AIS650 and signal splitter
So, will a new Axiom Pro work with my current radar?
And the new stuff- E120W,GPS, and AIS are connected with Seatalkng and not talking to the old stuff, ie auto pilot.
Not a bid problem but how can I connect them?
300 auto pilot
ST6000 control unit (installed Aug 2000)
E120W
RD418 digital radar
GPS 150 sensor
AIS650 and signal splitter
So, will a new Axiom Pro work with my current radar?
And the new stuff- E120W,GPS, and AIS are connected with Seatalkng and not talking to the old stuff, ie auto pilot.
Not a bid problem but how can I connect them?
↧
[CA11] Alarms to Bluetooth speaker
I have Axiom Pro displays and need a secondary alarm. I want to connect to a Bluetooth speaker so I can hear my anchor alarm at night in the cabin. I only see an option to use my connected speaker for media files. How can I use it for alarms? Currently they do not output to the speaker.
↧
[CA11] Seatalk ng connections
When using a Seatalk ng 5 way connector, do unused white spur connections on the 5 way need some kind of terminator or can they be left open?
↧
[CA11] Masthead wind cups and pointer
I purchased all new instruments. The new evo wind instruments utilize the same attachment at the masthead as the outgoing st 60’s, yes?
↧
↧
[CA11] Erasing AIS DATA on old VHF Radio, and AIS Box.
Just sold my ray218, and AIS 650.
How do I remove my old mmsi # from both the AIS650, and the VHF radio Ray218?
I did purchase a New AIS 700, and new VHF radio which the authorized electronics installer has set up for me.
Buyer is ready to install my old Raymarine products, and just want it all set-up accordingly.
Thanks.
How do I remove my old mmsi # from both the AIS650, and the VHF radio Ray218?
I did purchase a New AIS 700, and new VHF radio which the authorized electronics installer has set up for me.
Buyer is ready to install my old Raymarine products, and just want it all set-up accordingly.
Thanks.
↧
[CA11] Connection to the MFD
I'd like to connect my ST60 directly to the Seatalk(1) Alarm fitting on the E120 Classic. I have both connectors and a separate cable, and want to make sure I get the cable colors correctly matched to the connectors when I start soldering.
Any assist would be appreciated.
Any assist would be appreciated.
↧
[CA11] Multiple Axiom interfacing issues
Hello - it seems everything I could search is for older MFDs. I have a new Axiom Pro 9 and a new Axiom 9. The Pro9 is intended to be the data master. Both units have the latest software updates. I have a few questions:
1) Under network, the Axiom 9 also indicates it is the data master, so both MFDs want to be DM. I cannot fiind a way (including factory reboot) to turn off A9 DM. The A9 does see the AP9 and is set up to get the time and GPS info from the AP9. The A9 also sees the AIS that plugs into the SeaTalk connector.
2) The Quantum radar plugs into AP9, into a network port. FYI, the radar works and shows up on the AP9. The radar does not show up on the A9, even when I try to start it from A9. I prefer to not go WIFI for A9.
3) On the AP9, There is a cable from the NEMA2000 port into the SeaTalk connector. The A9 also plugs into the connector.
4) Both MFDs are on the same display group.
5) Final one!! I run Navionics charts on the AP9. I cannot get the A9 to see these charts. I was told I would not have to buy additional charts for the A9, that the two would share the charts.
Obviously, I have some issues and I can't figure it out. I very much appreciate your help. Thanks!
1) Under network, the Axiom 9 also indicates it is the data master, so both MFDs want to be DM. I cannot fiind a way (including factory reboot) to turn off A9 DM. The A9 does see the AP9 and is set up to get the time and GPS info from the AP9. The A9 also sees the AIS that plugs into the SeaTalk connector.
2) The Quantum radar plugs into AP9, into a network port. FYI, the radar works and shows up on the AP9. The radar does not show up on the A9, even when I try to start it from A9. I prefer to not go WIFI for A9.
3) On the AP9, There is a cable from the NEMA2000 port into the SeaTalk connector. The A9 also plugs into the connector.
4) Both MFDs are on the same display group.
5) Final one!! I run Navionics charts on the AP9. I cannot get the A9 to see these charts. I was told I would not have to buy additional charts for the A9, that the two would share the charts.
Obviously, I have some issues and I can't figure it out. I very much appreciate your help. Thanks!
↧
[LW11] Element HV & NMEA 2000 AIS receiver
Is the Element HV capable of displaying AIS data from a receiver on the NMEA 2000 network?
↧
↧
[LW11] axiom or element
hello I'm stuck for buying lighthouse mdf or lighthousesport mdf
here is the concern:
1 lighthouse communicates with raycontrol but no hypervision
2 lighthousesport has hypervision but no communication with raycontrol
know you tell me when one of the 2 auras what I'm looking for thank you
here is the concern:
1 lighthouse communicates with raycontrol but no hypervision
2 lighthousesport has hypervision but no communication with raycontrol
know you tell me when one of the 2 auras what I'm looking for thank you
↧
[LW11] Lighthouse OS compatible with free ECDIS S57 charts
Hello dears
I miss a chart for the Elbe river (part Magdeburg-Decin, a connection between German and Czech inland waters) at your chart store. Would it be possible to make the Lighthouse OS be compatible with free ECDIS S57 charts? These charts are very good an precise. You can find such maps here:
https://www.elwis.de/DE/dynamisch/IENC/
http://mapy.spspraha.cz/lpm/maps_S57.asp?lang=en
http://www.ris.eu/general/what_is_ris_/e...arts__enc_
Thanks in advance,
Josef
Elbe river missing.jpg (Size: 351.99 KB / Downloads: 1)
I miss a chart for the Elbe river (part Magdeburg-Decin, a connection between German and Czech inland waters) at your chart store. Would it be possible to make the Lighthouse OS be compatible with free ECDIS S57 charts? These charts are very good an precise. You can find such maps here:
https://www.elwis.de/DE/dynamisch/IENC/
http://mapy.spspraha.cz/lpm/maps_S57.asp?lang=en
http://www.ris.eu/general/what_is_ris_/e...arts__enc_
Thanks in advance,
Josef

↧
[DG11] S100 installation problem
Hi,
Early this year I have had installed a complete new Raymarine system on my 34” pilot boat: a.o. Axiom 12”, ACU-200/p70Rs, Quantum2 doppler Radar, 2 * i70s. I kept my AIS500. I am really satisfied with the performance/functionality of the system.
However. I have got one problem. I can’t get the S100 to work. I have updated all the software to the respective last versions. Whatever I do, the S100 continues to give the fault “NO PILOT”. The S100 handheld/base station have been returned for check-up by the Ray service center but were returned as the service center confirmed proper functioning.
Please be so kind as to give me hints how to solve the issue.
Thanks in advance.
Regards,
Rene
The Netherlands
Early this year I have had installed a complete new Raymarine system on my 34” pilot boat: a.o. Axiom 12”, ACU-200/p70Rs, Quantum2 doppler Radar, 2 * i70s. I kept my AIS500. I am really satisfied with the performance/functionality of the system.
However. I have got one problem. I can’t get the S100 to work. I have updated all the software to the respective last versions. Whatever I do, the S100 continues to give the fault “NO PILOT”. The S100 handheld/base station have been returned for check-up by the Ray service center but were returned as the service center confirmed proper functioning.
Please be so kind as to give me hints how to solve the issue.
Thanks in advance.
Regards,
Rene
The Netherlands
↧
[CA11] St70 AP heading about 40 degrees off from actual compas heading
Most of the summer my ST 70 AP heading has been about 65 degrees off from my actual compass heading. pretty much always read about 307 mag
When I engage AP tracking the boat does a hard starboard Crazy Ivan and I have to release AP and take back control.
Today I placed a large heavy magnent next to the GPS compass donw below and now its only about 40 degrees off. Did the large magnet some how un stick the heading or is the gps compass unit itself maybe bad?
I'm still trouble shooting this issue since early june. (Boat is new to us this year) St 70 AP with e120 HD display
Thanks
IMG_2552.JPG (Size: 88.09 KB / Downloads: 2)
IMG_2553.JPG (Size: 64.67 KB / Downloads: 2)
When I engage AP tracking the boat does a hard starboard Crazy Ivan and I have to release AP and take back control.
Today I placed a large heavy magnent next to the GPS compass donw below and now its only about 40 degrees off. Did the large magnet some how un stick the heading or is the gps compass unit itself maybe bad?
I'm still trouble shooting this issue since early june. (Boat is new to us this year) St 70 AP with e120 HD display
Thanks


↧
↧
[CA11] Deepwater area in white vs blue.
I have an e125 using a Navionics+ card. I recently renewed and updated the card. 9/10/2019
Since that action I can no longer view deep water (set as a value for a given contour line depth) in white. It only shows in blue.
The only change I made was the card update, no changes to set up in the MFD. I did go into the set ups after I observed that the deep water no longer showed in white.
I am along the SoCal coast so most of the chart should show in white especially when showing larger area. I used the 12 foot contour line as my boat only draws 3 feet.
My MFD software is version is v19.03-00036. I don't see a later software version.
Any suggestions. Is this a Navionics issue?
Thank you
Since that action I can no longer view deep water (set as a value for a given contour line depth) in white. It only shows in blue.
The only change I made was the card update, no changes to set up in the MFD. I did go into the set ups after I observed that the deep water no longer showed in white.
I am along the SoCal coast so most of the chart should show in white especially when showing larger area. I used the 12 foot contour line as my boat only draws 3 feet.
My MFD software is version is v19.03-00036. I don't see a later software version.
Any suggestions. Is this a Navionics issue?
Thank you
↧
[CA11] VHF static
I've been troubleshooting a problem where I get static and interference on my VHF radios, and think I have isolated the culprit to the radar. I seem to get the interference when my radar is in standby mode, but it goes away when the radar is transmitting. Any thoughts on what is happening, and how to eliminate the static?
I have checked and am running the latest software on the MFD and all other devices. Currently using LH3 v3.10.42 - Bermuda.
I had this same problem before upgrading this year from my eS127 and es97 MFDs that were running LH2, but didn't observe the Tx versus STBY issue until now.
I currently have a system consisting of Axiom Pro 12, Axiom Pro 9,
RD424 HD digital Radar
CP470 CHIRP Sonar
SR150 Sirius XM Weather Receiver
AIS700 Class B Tranceiver
HS5 network switch
Radios are Lowrance Link-5 and Standard Horizon GX2150; each connected via NMEA 0183; one to each MFD. Each radio is connected to a digital 529 VW antenna, one of which goes through the AIS700 internal antenna splitter. Swapping which radio is connected through the splitter does not affect the symptoms in any way. I hear the static on both radios; more on some VHF channels than others.
Thank you!
I have checked and am running the latest software on the MFD and all other devices. Currently using LH3 v3.10.42 - Bermuda.
I had this same problem before upgrading this year from my eS127 and es97 MFDs that were running LH2, but didn't observe the Tx versus STBY issue until now.
I currently have a system consisting of Axiom Pro 12, Axiom Pro 9,
RD424 HD digital Radar
CP470 CHIRP Sonar
SR150 Sirius XM Weather Receiver
AIS700 Class B Tranceiver
HS5 network switch
Radios are Lowrance Link-5 and Standard Horizon GX2150; each connected via NMEA 0183; one to each MFD. Each radio is connected to a digital 529 VW antenna, one of which goes through the AIS700 internal antenna splitter. Swapping which radio is connected through the splitter does not affect the symptoms in any way. I hear the static on both radios; more on some VHF channels than others.
Thank you!
↧
[CA11] RS150 GPS receiver
Does this unit come with a rail mounting bracket or do you need to purchase one separately? If so, can you please provide part number and cost? Thanks
↧