Sabiki mode?
I have seen some talk and questions about Raymarine adding Sabiki mode. Do you know if it in the plans or a possiblility?
View ArticleHow to troubleshoot SR100 connection to E80
I recently bought an '08 Formula 350 that has a working Raymarine E80 MFD, a working Raymarine DMS300, a working SeaTalk Network hub, and a Raymarine SR100 that I would like to get working. The Sirius...
View ArticleClik here to view.
RE: Replacing all electronics
I have successfully installed all of my new electronics following the lightening strike as shown in the attached diagram. I now want to incorporate the analog signal from my engine temperature gauge...
View ArticleBack track sonar image
Hi, It is possible to backtrack a sonar image on a A98 so a waypoint can be placed. I find that the image is moving fast and I do not have time to place the waypoint. Thanks
View ArticleRain Filter / FTC Control
We are using a 48" Super HD array with e127/125 series MFDs. We are finding the Rain filter ineffective other than possibly a small effect on the inner 1/3 of the screen around the boat, and there does...
View ArticleSetting NMEA 0183 baud rate on E80 Classic
I currently have installed: E80 Classic 125 GPS S3G SmartPilot SmartController ST60 Speed, Depth, Wind ST6001+ E55059 MUX ICOM m422 VHF with DSC FloScan 9500 with GPS interface I'm considering adding a...
View ArticleRS125 connect to MFD via 0183 or SeaTalk?
I currently have installed: E80 Classic 125 GPS S3G SmartPilot SmartController ST60 Speed, Depth, Wind ST6001+ E55059 MUX ICOM m422 VHF with DSC FloScan 9500 with GPS interface My configuration...
View ArticleAutorouting safe Depth cant be changed?
i am trying use the resource of autorouting in my raymarine e7d, however the depth of security allowed is always of 10m, even that i change that depth in the settings. i use navionics + for america of...
View Articlex30 and ST6002
I have a X30 Smart pilot with a ST6002 controller. When I scroll thru the data screens the breaking to waypoint is at least 100 degrees off. The correct waypoint name is displayed and the distance to...
View ArticleES98 Multifunction
I have recently acquired a 2003 Mainship trawler that I plan on replacing the electronics. I have (2) questions: Presently, there is an RL70C plotter and I would like to replace it with an ES98. My...
View ArticleClik here to view.
e165 MFD with legacy GPS antenna RayStar 108
Hi Chuck ! I got my new MFD and Radar from the dealer today !! I think I have a final schematic diagram based on your input, but another question.... I believe my old Nav398 has a RayStar 108 GPS...
View ArticleFlush mounting footprint of new product is smaller than presently installed...
Flush mounting footprint of new product is smaller than presently installed product It is not uncommon for the footprint of a new marine electronics product to differ from that of the product being...
View ArticleAdding wind data to a system featuring an a/c/e/eS/gS-Series MFD
Adding wind data to a system featuring an a/c/e/eS/gS-Series MFD Raymarine MFDs do not feature support for calibrating wind transducers. In order to add wind data to a system featuring...
View ArticleClik here to view.
E70153 and ST4000
Hello Q:How to connect ST4000 and E70153 in order to use Windvane mode (Windtrim) on ST4000 to get Autohelm Sail to Wind Angle. I’ve got my boat (Catalina 36, 1985) with ST4000 installed. ST4000...
View Articlee97 Heading and Distance to waypoint
Sorry if this is too simple of a question but the user manual does not make if very clear. How to I display the heading and distance to a waypoint on the chart?
View ArticleBack-from-repair C120 does not recognize/load Navionics charts
I've reviewed (or, at least, attempted to search for the answer) the FAQ and nothing shows regarding turning on the C120 Classic MFD and having no Navionics charts load. I attempted the one we'd been...
View ArticleA127-A128 Transducer Plug
Today I decided to switch positions of my 127-128, to take advantage of the chirp / down view on the 128 with the CP 100 transducer. I sure was surprised, when I removed both units to switch them and...
View ArticleTransducer Adapter Cable
Can someone tell me the part number of the transducer adapter cable needed, to attach an original style CP 100 transducer to the A128. Also, will the newer model CP100 transducer hook up to the A128,...
View ArticleE120 / AIS Problem
Hi All We recently purchased a new to us Trawler. It has Raymarine E120 & E80 MFD's, radar and auto pilot. I noticed that the software on the MFD's was about 4 Revs levels out of date. So after...
View ArticleClik here to view.
A67 not logging time in GPX file
Hi, I'm new to the forum, I have noticed on my a67 that the exported GPX file is missing the time variable. I do need the time variable in the GPX file, is there a setting I am missing or is it not...
View Article