Clik here to view.
ECI-100 and Volvo EVC-mc
Hi! I have a Volvo Penta D3-160A-A (early 2005) engine with 1st generation EVC-mc instrumentation. This early version of EVC transfers information between the EVC brain box and the instruments on...
View ArticleClik here to view.
AIS and radar targets are out of sync
Hello, I have AIS650 and RD418D connected to my c90 MFD via STng. My AIS ship display icon is off by several degrees, more or less depending on COG. It is quite disconcerting to watch my ship moving...
View ArticleChoosing transducer for eS98
Putting an eS98 in my new to me 2000 Amberjack 290 with twin sterndrives. Understand I'll need to go with through hulls for best performance. Regarding Chirp/downvision, do I need both type of...
View ArticleIntegrating eS98 with old RayData
I'm installing a new eS98 but would like to keep my old RayData for sounder redudndancy. What would be the best means of integrating the two? NMEA or SeaTalk? Also, any chance the existing transducers...
View Articletype 1 rotary drive unit / service
Dear Sir, my rotary drive unit type 1 have given to me 15 years of troublefree service, but now, I feel that is a good idea do any inspection or change in it, could you be so kind to point which parts...
View ArticleHow to enable NMEA output from C120W?
Is there some setting in the C120W MFD to turn on and off NMEA output? I've spent hours examining the User Reference Manual to no avail... I have the C120W MFD as well as ST-70 instruments including...
View ArticleTry to set the Data Master
I have a e127 and e125 and each one of them only shows them self when trying to set the data master. When I did a software upgrade on the e127 it was seeing the e125. What should I be doing.
View ArticleE120 Classic trunnion questions
Hello. I recently purchased a boat with two E120 Classics flush mounted in the pilothouse. I would like to move them to the flybridge but there is no room to flush mount them there so they would have...
View ArticleUpgrading and integrating new MFD into older system
We are running the following Raymarine products on a high speed patrol boat ( Zodiac): - Raystar 125 GPS Receiver - Raymarine ST60+ Graphic Display - Raymarine DSM300 Digital Sounder Module - Raymarine...
View ArticleG-Series Command Center Keyboard E02044
I've just purchased a boat with the G-Series Command Center Keyboard connected to an E series MFD via SeaTalk. The keyboard does not ever move beyond the startup screen showing software rev 2.7/1.5 and...
View Articlepower/data cable from Radar quantum
The power/data cable from the quantum has three wires for power. Red, Black and Green. We are connecting to a distribution panel. Do we use the green wire and if so do we connect it to negative as well...
View Articlelatitude / longitude
From the old forum>>>> is the math correct or am I missing something ?? I come up with .363 am I figuring something wrong or is this a typo ?? thank you Welcome to the Raymarine Technical...
View Articlevmg/ true apparent wind not showing on c127 and st60+
Installed a c127 chart plotter . ev100 auto pilot, st60+ wind my speed is a standard Horizon 150 I have tried sending talker from speed to nema input on c 127 no read. I also tried connecting to...
View ArticleYamaha command link engine ID problem
I have a E127 mfd. and yamaha F225 engines. they are interfaced with command link >E100 Both engines were identifying fine before I upgraded from V16 to V17 software. Now even if set up as though I...
View ArticleDepth for a Product Upgrae
I'm going to upgrade an older Raytheon/Raymarine system and need help with the Depth part. I want to update to two 12 inch eS systems with a Quantum Radar. That all seems easy enough. What do I do for...
View ArticleCP450C UPGRADE
I have a CP450C sonar unit with software vs 3.09, is this the latest software available? If there is an upgrade can you direct me to the upgrade?
View ArticleGS165 and eS98 network
This winter will spent updating my old 2006 electronics package. Currently I'm using Classic e120, Smart pilot autopilot, Dsm300 sonar with a P66 transducer and Raydome Radar. I just ordered the Gs165...
View ArticleHow do I convert coordinates specified in seconds to the format used by my MFD?
While some third party products and applications (ex. Google Earth, etc.) support entry of and specification of waypoint latitude and longitude coordinates in DDD-MM-SS.SS format, Raymarine products...
View ArticleNon-Raymarine Radar compatibility with Raymarine Ax or Cx MFD
I just bought a sailboat that has a Nobeltec InSight Radar 2 (IR2) setup where the previous owner had the Nobeltec software loaded on a laptop and the signals from the radar dome wired into the laptop....
View Articletranducer interface
I have an e125, a CP450C, and a M265LH transducer. The transducer has no plug, just a bare cable. I have been told there is a converter that will allow me to to wire the transducer to connect to the...
View Article