[CA11] Upgrading from e series to Axiom Pro
I am planning to upgrade my existing dual screen e series system to the Axiom Pro. Replacing an e125 and an e127 with 2 new Axiom Pro 12 RVX units. Can I simply install the new Axiom units using the...
View Article[CA11] Seatalk RL 70 C Pathfinder
I have a RL70C Pathfinder system installed. It has the 'Mother' unit (where the cards are inserted) and a repeater unit in the cockpit. The Repeater unit got damaged by moisture and I want to replace...
View Article[CA11] Wind instrument reads low
I have a networked system, C80 Classic, SPX-5 autopilot and an ST6001 control head connected via the STng converter. I also have Raymarine instruments for depth and speed, a nmea 0183 instrument for...
View Article[CA11] Autopilot / control head compatibility
Our catamaran has a 400 course computer, with ST6001+ and ST600R control heads and a Smart Controller. The rest is ST60+ series, plus a multiplexer and PC for navigation The autopilot could break down...
View Article[CA11] Following Route on E80/E120 MFDs
I have an E80 (nav station) and E120 (helm) networked via SeaTalk-hs. Also have autopilot. I’m able to create routes, but the “follow route” and “follow route options” buttons are unavailable. In order...
View Article[LW11] LightHouse 3 Trim Tab calibration support
Hello, as already earlier from different user requested (back to 2014) a calibration application is fundamentally necessary for the use of 3rd part NMEA2K sensor/devices which need to be calibrated....
View Article[DG11] Cp450c firmware unavailable
Hi there. I m trying to find a link to download the latest firmware for my cp450c but it seems to be no possibility. There is only version and bug fixing list. Can you help? Thanks
View Article[jh11] i70 wind not displaying
I have an i70 display with wind, speed, depth. My wind instruments display Wind angles but not wind speeds. Worked this morning, but now I can see the paddles turning but the display shows zeros. Tried...
View Article[JH11] a98 to Axiom upgrade NMEA 0183 AIS
Hi - Just replaced my a98 with an Axiom 9. My NEMA 0183 AIS (CYPHO 1505) has 2 Xmit conductors and 2 Receive conductors that connected to the NMEA conductors in the power cable of the a98. How do I...
View Article[JH11] Cpt- DV cable
I ordered a cpt-dv transducer and has wrong ends.. should have ordered a cpt-100dvs... is there an adapter cable to solve this?
View Article[JH11] Es127 not connecting to cp 470
I am following up this from a previous post... have a es127 connected to a new CP 470 and a new M265 chirp.. the mfd was previously connected to a M260. The MFD would not select transducer and message...
View Article[JH11] I70 alarms on own vessel
Hi all, I have class-A AIS. My i70 alarms on my own vessel. I cant find a way to enter my own MMSI to make it stop. Please help. Thanks! -Greg
View ArticleDRIVE STOPPED alert on Evolution Autopilot control unit
DRIVE STOPPED indicates one of several issues, 1) The ACU has detected that the rudder is not moving in response to requested drive output 2) The ACU has detected a drive over current and so has...
View Article[JH11] DS500X
Today my DS500X would not power up. All other electronics work. The Raymarine Auto Helm display in the lower helm shoes the depth. But the chart plotter doesn't show the depth. Clearly something is...
View Article[JH11] Axiom compatibility
I currently have an E7D and will be replacing with an axiom pro 9. My current peripherals are an SPX 5 pilot, HD radar (2012-3), AIS 650. Are these peripherals all compatible with the Axiom? Can the...
View ArticleClik here to view.
[JH11] RD 218 Power surge
My boat went thru Hurricane Irma, suffering a power surge that blew out the capacitors on the RD 218, E80 MFD and the DSM300. I found a good E80 replacement. I'm thinking of replacing the capacitors in...
View Article[JH11] MFD says no Pilot connected
Just upgraded to the latest software version as of today. MFD reported Success. The system is standard factory installed by Riviera in 2015 E125 MFD, PR70R networked via Volvo EVC to IPS600 pods. The...
View Article[JH11] S100 remote control with spx5 wheel pilot
Hi, I have an SPX5 wheel pilot connected via a seatalk to stng converter to my stng networked instruments. I'd like to add an S100 remote control to the system. Can I connect the base station into the...
View Article[LW11] What is the difference between C120 and E120?
I'm wondering if it's worth changing out my C120 to an E120.
View Article[LW11] i70s Speed - Decimal Places
Hi, I just replaced my ST60 Speed with an ITC-5 and i70s. I am only getting Speed data to 1 decimal place whereas I got two before with the ST60. I like the 2dp data for racing to see whether we are...
View Article