cables
I was wondering if normal cables with rj 45 ends can be used instead of seatalk hs cables on a inside installation as waterproof connections are not an issue . The price difference is quite a bit ....
View ArticleAdding e7, i70 and iTC5
My existing system consists of an EV-100 Wheel-pilot set up with the 12v power wired directly to the ACU100 (with rudder sensor hard wired), that connected to the 5-way connector, power to the 5-way...
View ArticleUsing standard CAT5/6 patch cables instead of SeaTalkhs Cables
It is strongly recommended that standard CAT5/6 patch cables not be used in place of SeaTalkhs Cables. Raymarine products featuring a SeaTalkhs socket(s) (ex. E-Series Classic MFDs, C/E-Series...
View ArticleA68 HELP!
Hello I’m new to this forum and looking for some help/guidance with me Raymarine unit. I purchased a Raymarine A68 unit with Navionics Gold package, really nice little unit it seems very loaded for...
View ArticleLighthouse v17 wifi connection problems
Hi, having two issues (and a gui bug) with v17 related to getting Internet connectivity via wifi from my es series (trying to get the new Grib weather service up and running). 1. Refuses connection to...
View ArticleEvolution autopilot S-ing
The reported symptoms are typically associated with old autopilot software and/or poor speed through water data. The first action to be taken in correcting this issue would be to ensure that the...
View ArticleNetworked e7, and A68
So the units are networked together and seem to perform well but not great. The speed (SOG in mph) on the e7 is way off. When the boat is stationary on the cradle it will read anywhere between 0mph and...
View ArticleSpx5 compass calibration
Installed software update and now need to recal compass using P70 controller. Please point me to that procedure.
View ArticleMFD causing radio static
When I turn on breaker for E125 MFD both VHF and 2 Meter radios get some static noise. When I power up the E125 the static noise gets even worse. When I hit the mic key on my VHF it stops the static on...
View ArticleRD424 operational issue
Hello, Writing in regards to a RD424 4KW 24" radome coupled to an E80 MFD. The owner has reported intermittent issues which have now manifested in two ways. Firstly, "No Data Source" is intermittent....
View ArticleWill my a/c/e/eS-Series MFD need to be interfaced to a external GPS Sensor?
Within a network of a/c/e/eS-Series MFDs, a single source of GPS data (HOME->SET-UP->SYSTEM SETTINGS->DATA SOURCES->GPS) will need to be specified via the system's Data Master MFD....
View Articlec125 slave unit chart background issue
I have two c125 displays, one is a slave to the master. Both are updated to v16.49. Has worked fine for two years. Now with both units on in chart mode, the slave unit only shows the base map (no...
View ArticleUnable to Select Data Sources with J2K100
I installed a Maretron J2K100 J1939 to NMEA 2000 gateway for use with my generator. I connected it to the SeaTalk(ng) network via the raymarine SeaTalk(ng) to NMEA2000 adapter. The device functions...
View ArticleTheyr weather connection questions
I have an e95 MFD which has current software. It is connected to an i60 series and 6000 autopilot. I am interested in adding the Theyr weather application for a transatlantic to Bermuda and am...
View ArticleAnchor camera
Dear Forum members, I Would like to instal a camera to check if may anchor is totally folded. I have an A98 MDF. Could someone give-me a tip what would be the best an ship solution for this. Thanks in...
View ArticleNeed to reset MFD after installing v17
Just installed version 17 on my A125 MFD. Is it necessary to do a system reset?
View ArticleS1G Course Computer Compatibility
Can I use a S1G Course Computer Model E12122 with a Mark II Wheel Drive & ST6002 control head on a sailboat?
View ArticleVerifying DSM300 S.W. version
How do you check the software version of a DSM300? It is connected to a ES128. Thanks
View ArticleClik here to view.
Dragonfly 7 install
I have a Dragonfly 7 Pro with a CPT-DVS transom transducer I need to install on a Chaparral SSi 204 I/O. Looking for any suggestions. I've been debating install on port side in the step beside the...
View Articlea/c/e/eS/gS-Series MFD v17.45 failed to update EV-1 Sensor Core software
I am in process of adding a 2nd STng converter so I can connect my older Standard Horizon VHF radio to my backbone, and be able to use the DSC function. A tech at Raymarine suggested I update software...
View Article