Rudder Reference Installation with EV-200 Power
I'm converting a Simrad AP to your EV-200 on a 2007 Back Cove 33 with hydraulic steering. Q1. During the middle of the conversion, is the Raymarine EV-200 autopilot able to function without the rudder...
View ArticleCpt-110 transducer cable connector pin broken
I have a Raymarine Cpt-110 thru hull transducer. When trying to connect it to the es78 MFD, it would not go in all the way. It appears that one of the pins was bent, and when attempting to straighten...
View ArticleLegacy ????
What equipment was designated as the Legacy Series and How did it differ from the Pathfinder series ...... Just curious .. Thanks
View ArticleE80 connected to a DSM300, can't update
I was able to update my E80 to the newest software but I am having a hard time updating the DSM300.
View Articledragonfly 7 pro transducer install
Hello, I found a post from back in June of 2014 from an Erik Mengel that supposedly had pictures of his transducer install on a Ranger boat (since it has the step at the transom). Is there any way to...
View ArticlePowering Quantum Radar
Dear Members, I have just installed the New Quantum Radar, and I can't power it on. I have an A 98, and when I put it in the Radar screen, a window displays a massage to power it on, I Tryed several...
View ArticleST40 depth and new system (i70, etc)
I currently have my depth sounder (part unknown) and it is displayed on the ST40 on my helm. I am upgrading to an A12 and 2x i70s, and the CPT120 thruhull transducer - however, the transducer will not...
View ArticleFusion ip700i control from MFD
Is there a way to control the Fusion from the MFD without fully going into the Fusion link "app" on my E7d? Meaning, is there an audio control popup that would control the basics like play/pause, next...
View ArticleMaretron WSO100-01 NEMA2000 Weather station
Hi, I'm looking to add a Maretron WSO100-01 ultrasonic wind/weather station to my existing NEMA2000 network or directly into Seatalk NG). The NEMA2000 network is just a spur feed into the STNG to get...
View ArticleMay 2016 Updates - No Website Info
I just installed the new v17.45 update on my MFDs and noticed that my EV-2, p70r and i70 also received an update, but the support/software section of the Raymarine website still shows the old versions...
View Article2 mfd's, do I need 2 separate CF Cards?
I have 2 Raymarine E80 MFD's. I only have 1 Navionics card. Do I need another Navionics card to see more than just the Raymarine basemaps on the MFD that doesnt have a card inserted? These mfd's are...
View ArticleP70 Message
Greetings, On my P70 AP, I have a message at the bottom detecting magnetics. The little red progress bar has not moved in hours. I've updated to the latest firmware and I'm wondering if this is a new...
View ArticleUpgrading from Ray 240 to 260
I have the 240 in a boat that is a nightmare to string new cable. Outside of the STNg cable, can I reuse existing cables for the handset, power, speaker etc saving me to rerun everything? Also, it...
View ArticleClik here to view.
Detecting Magnetics
After updating to v17, i noticed that the autopilot and p70r also received an upgrade. There is now (constantly) a progress bar at the bottom of the screen that states: "Detecting Magnetics" It has a...
View ArticleAUTO ok, TRACK seems to hunt
I've got an EVO (ACU-400, hydraulic, 37 ton, 44' trawler) and it does reasonably well on AUTO. I then hooked up Coastal Explorer to my RM/N2K network (with Actisense USB connector), start a route, and...
View ArticleC140w CF to sd adapter
it is possible to use the CF to SD adapter in C140 W? one friend wants to use the Navionics + charts in your C140W thanks
View ArticleClik here to view.
EV200 compatibility with Garmin 7610xsv
Hello, I recently purchased and installed a new electronics system for my 04 Scout 280 Abaco with twin Yamaha F225 outboards. The installation when smoothly and I tested it for the first time and...
View Articlee95 - e22 158 Sea talk incorrect time
I have an e95 MFD which is new this year. It is connected to an i60 series and 6000 autopilot. I am using the external GPS antenna. I connected the old system system to the MFD thru the e22 seatalk...
View ArticleClik here to view.
View Generator AC Voltage NMEA2k Data
Is there a way to display the NMEA2k AC Voltage data from a generator? I can see using a NMEA2k Viewer that my generator is broadcasting: PGN:65030 "Generator Average Basic AC Quantities" I would like...
View ArticleVoyage Planner Connected But Not Xfering Data to e7
I am already familiar with transferring data between an MFD e7 and Voyage Planner. It has worked fine for a couple of years. However, I just upgraded to Voyage Planner 1.3.0.4, and it is has stopped...
View Article