Volts on es128
Does the es128 have an option to show the volts in the databar it is receiving directly to the unit from the main power connection or only through the NEMA battery setup?
View Articlei70
I have a seatalkng network with 2 - i70 and 1 - ST70+ displays. In calibration mode, I can see the windspeed from the wind pod, but it doesn't show on the i70 or ST70+ screen in display mode (reads 0.0...
View Articlereplacement gaskets
Is there a part number and source for replacement mounting gaskets? I have i50, ST60, and p70 displays, which I believe all use the same mounting gasket. I plan to replace the NavPod on which my...
View ArticleClik here to view.
Stand Alone RS130
I am attempting to interface a RS130 to a vYacht WiFi Multiplexor This is outside of the boat as I wanted to test it was working before installation. The boat has an existing ST1 network of knotmeter,...
View ArticleHow can I determine the model of transducer which has been interfaced to my...
During manufacturing, a tag identifying the transducer make, model, and product ID is affixed to the plug end of Raymarine or Airmar fishfinder transducer's cable. The product name (ex. B260, B744V,...
View ArticleSR50-100 / Duel Classic E-Series / Sirius Charter Package
Hello new forum, I really like what you guys have done! I have the above configuration with all the latest software updates installed. A few years back the service stopped giving me alerts, weather...
View Articlea series MFD and DSM 300
I have recently installed an A series 128 MFD with Downvision sonar, 24" raydome, Ray 70 Vhf with Ais. Also have a DSM 300 with speed and temp transducer that is still installed because it is cheaper...
View ArticleC127 discontinued ?
Can anyone tell me if the C127 is a discontinued unit ? Im thinking of getting one since my C120 took a dump and I was told that the switch out from my C120 to the C127 is an easy switch. I may just...
View ArticleE22158 Seatalk1 to SeatalkNG compatibility for new install
Hi, I return to the forum once again with a similar question I did in 2015. This time I am comissioned for an install that expects me to link a new SeatalNG system consisting of instruments with 2 i70...
View ArticlePump PSI ?
Good Morning, Still working thru mounting my EV-100 power pump. I noticed my seastar hoses are rated for 1000 psi ? Can you tell me what the PSI is on the EV-100 pump so I know if I have to replace all...
View ArticleWhat are these lines?
I just installed an Evolution EV 100 that is hooked up to my A98 MFD. I only got to try it for a few minutes as it was a little too rough for an extended test session. I now have two lines vectoring...
View ArticleBattery voltage on MFD
t would be good to display the MDF supply voltage on the screen in my C125 I did not find this option thanks
View ArticleCF Card Issues with Classic E120
I have a classic E120 ( 2 actually) and I am trying to move over a bunch of waypoints that are on a Sandisk 256 MB CF card. When I put the card in the reader on my laptop I see the file (ARCHIVE.FSH),...
View Articlecover for type 16CD397 radar
Where would I go to get an 18" cover that blew off at one point?
View ArticleA125 MFD reverse compatability
Chuck, I will like to replace my 2006 vintage C120 MFD with a a125 MFD. However, I will like to know if that could be integrated with the other components currently integrated with my C120 MFD. The...
View ArticleClik here to view.
0.5 L pump install questions
I'm finally to the point of being able to install my pump, and I am running in to issues trying to get adapters / T fittings in sizes that will work with my system. I also want to make sure that I am...
View Articlei60 wind pack installation with deck stepped mast
I have purchased the Raymarine i60 wind system and want to install it on my boat which has a deck stepped mast. The literature with the instrument and other information I have read on line indicate...
View ArticleCheck valves ?
Installing the EV-100 power unit, will be picking up appropriate "T" fittings for my seatstar steering install this afternoon. Is it necessary to install check valves into the system ? Is the purpose...
View ArticleTransducer selection
I am also using the Airmar B 744V thru hull transducer. When I went to the set up menu and it was "searching" for a transducer, none came up and the system would not let me enter my own information....
View Articleiphone ray remote
I've just installed Ray Remote on my iphone 5 but it doesn't seem to have any control features- works the same as Ray View when connected to a C97. Both have the latest software. Any ideas?
View Article