Clik here to view.
Axiom and Axiom Pro Wireless Display (Miracast)
Since v3.2.86 software (http://www.raymarine.com/software-update...xiompro/), Axiom (http://www.raymarine.com/multifunction-displays/axiom/) and Axiom Pro...
View ArticleQuantum doesn't show SOG/COG
Hi, I have a new Axiom 12 with Navionics and Quantum wifi radar. The radar image is not displaying sog/cog, although I can select them on Navionics and they display just fine. Without sog/cog on the...
View ArticleAxiom 9 setup
I have a brand new Axiom 9. Why does i not show any of the canals in Cape Coral, Florida? I have looked through the settings pages for Navionics as well as lighthouse and C-maps. I do not get any of...
View ArticleClik here to view.
C Series MFD Wont Show All Chart Soundings
I'm using a network of C97 and C95 MFD's, coupled with digital radar, sonar and various Raymarine instruments and autopilots. The C97 is configured as the data master, and contains the Navionics chart...
View Articlea78 MFD compabitble with e127 via wifi?
I would like to confirm that I could install an a78 head unit at my upper control station and network it via wifi to my e127's at primary helm. Any reason it would not work with full functionality?...
View ArticleCOG - hsb2 Pathfinder Series Radar Display
I have a hsb2 Pathfinder Series Radar Display (RL80CRC PLUS) that is still working! (lol) But I have several COG vector lines that always remain on the chartplotter display. They were made when the COG...
View ArticleUpdating Autohelm 100 and Raydata units
I have a functioning older autopilot system consisting of an autohelm 100, Raydata display, flux gate compass, rudder position sensor and Ray pilot 65 remote, and hydraulic unit. As the Raydata display...
View Article(DG) Ready to get my old Raymarine AP working S1 Course Computer.
After 2 years of owning the boat, the ONLY thing that doesn't work is the AP. It is an older S1 with ST8002 and a ST6002 at the upper station. I just repaired the rudder indicator -- and now get nice...
View Article(DG) autopilot rotary drive 1
Dear SR. My autopilot Raymarine after 16 years of perfect service don´t function properly anymore, The failure is that you can hear the motor of the unit trying to correct the course but it run free,...
View Article(DG) New Spx10 calibration/setup
Hi, i have just upgraded my autopilot and purchased a used raymarine smartpilot x10, as well as a st6002 control head. These are both second hand and from seperate people (never used together), is it...
View ArticleE125 Touch not Responding
I have an e125 and an e127. The 127 is working perfectly. The e125 seems to be partially non responsive to most touch commands. The LOCK Touch is Off. The initial accept button touch will not work. The...
View Articlesoftware update question
I have an e7 MFD and updated the software to version 19.03 shortly after the April update was released. I see the latest update is still listed as 19.03, the one released in April, but looking down...
View ArticleCan you connect Axiom to RL80C plus for GPS signal
Hello Raymarine, I have a 2003 searay 420 with all original Raymarine products, RL80C plus, Raypilot ST7001, Raymarine VHF, speed/ depth transducer, and RayNav 300 GPS which i'm looking to replace with...
View ArticleGathering data to help diagnose autopilot performance problems
Autopilots are complex systems with behaviour that depends on input from multiple streams of sensor data, vessel speed, steering characteristics and much more as well as weather and sea-state. If a...
View ArticleRayView and RayRemote with Axiom Pro
I have a WiFi network on my boat that I want to connect all devices to, instead of connecting to the Axiom's WiFi Sharing network. 1. I cannot see any way to configure the Axiom Pro to use my WiFi...
View ArticleCP100 and multiple transducers?
I currently have a p66 transducer that is networked to my two e7D MFDs through a HS5 Raynet switch. I would like to upgrade to a CP100 module and a CPT100 transducer. However,I would also like to keep...
View ArticleClik here to view.
Backbone Power via ACU-400
I just finished my installation (see diagram attached) and per documentation recommendation and advice on this forum, I powered the backbone from the ACU-400. After a bit of testing the backbone lost...
View Article[CA] Axiom Pro's Not Sharing Charts
I have two Axiom Pro 12" RVX MFDs. They are connected to a RayNet HS switch. The MFDs see each other and one is set up as the master. Settings, etc appear to be getting shared correctly, but even...
View Article[CA] eS128 MFD displays wide magenta track following boat icon
When using Navionics Chart for my Es128 MFD, a wide magenta track is displayed behind the boat icon when underway. I have not activated the track function nor is this track recorded in my data. I have...
View Article[CA] only want to use sonar & navionics
I have no use for applications other than subject. No radar, no engine data and etc. Only chart will be Navionics. How do I get away from all the clutter. For instance, I always run Heads Up but the...
View Article