Issue with Autopilot
I recently bought an EV-100 Power Autopilot last year and cannot get it to work correctly. When I set the autopilot, the boat start moving to port and the autopilot is constantly correcting the engine....
View ArticleSirius radio
I recently bought upgraded my multi function display from a C 80 to the new Es Series. I have a separate switch to turn the Sirius radio on, and can hear the advertisement channel from Sirius. When I...
View ArticleST-STng wiring: power and p70 connections
I am installing an EV-100 (on the dining room table at the moment, but later in a boat). 1) It would be convenient to wire the red power supply line to the ST-STng converter hub and let it supply power...
View ArticleEV-100 wheel pilot pedestal bracket too large
I am installing an EV-100 onto an older Edson pedestal whose diameter is smaller than the curvature in the supplied pedestal bracket. I have drilled the holes and fitted it temporally but I need to...
View ArticleSt7002 -SPX30 and c125 MFD
When I innitialy purchased the MFD c125 I connected the SPX30 via seatalk NG and the ST7002 via seatalk. I was using the navionics chart to navigate. In order to make the whole thing right I connected...
View ArticleClik here to view.
New boat installation Help
Dear Members, I'm preparing my new boat and purchased a lot of equipments and I will try install all myself. I would like to gently ask if someone can check if my installation diagram is right. Please...
View ArticleC80 waypoint does not show up on ST60 MFD
I have a C80, with 2 ST60+ and 2 large MFD displays, and 2 Autopilot displays. When I "go to" a waypoint, the C80 shows the distance and bearing to the waypoint. But the waypoint does not show up the...
View ArticleSR6--no audio?
Hello, I have a SR6 onboard and eSeries MFD's......for the last couple of years, I have contacted Sirius and they set me up with the ESN for Mariner weather and audio subscription. Of course I had to...
View ArticleClik here to view.
Dual E120 Classic to e125 helm upgrade
Hi Chuck, I am in the process of upgrading my original 2007 Sea Ray 44DA Raymarine installation: - 2 E120 Classics - 48" open array radar (other components, some of which I hope to leave/reuse for the...
View ArticleDragonfly splitscreen view
As you probably can tell from my previous questions, I am not very good technically. My question is how to change my split screen view from horizontal to vertical.
View ArticleRebate
Hello. I ordered a Dragonfly 7 pro on 4/29/16. The supplier is now telling me that the unit is backordered. Since my order date was still within the time restriction for the rebate, will I still be...
View ArticleQuantum vs HD radar
I am looking to upgrade my mfd and radar on my 48' Hatteras LRC, top speed about 8 knots and used for cruising and weekend trips. I had been considering the HD Color 24" but with the introduction of...
View Articlereplacing a ST6002 control head
I was told that the ST6002 control head are out dated and that Raymarine do not have parts to repair this unit, So what newer unit will be compatilbe with my S1 autopilot and C-120 on a 2007 power...
View ArticleTransducer question
I have a E66079 transducer already installed and I'm thinking of upgrading my MFD. 1) Will this transducer work with an a67 MFD? 20 Alternately, will this transducer work with an e125 or e127 MFD?
View ArticleClik here to view.
Upgrade from E120 Classic to C125
I am looking at replacing one of the E120's we have in our system with a C125 in order to accommodate a CP570. I have spent some time going through the FAQ's here and other posts and have put together...
View Articletransducer troubleshooting
I am not getting any speed or depth readings on my ST70 display. The transducers are connected to E122xxx seatalk ng pods. The network shows the pods are connected, but no readings. How do I...
View ArticleRadar -- no data source followed by operation
Something has changed. My radar and E-120 are 9 years old. Previously when I switched on the E0120 the radar went into operation quickly. Now I find when I switch it on that it reads "No data source"....
View ArticleClik here to view.
Raster Charts Priority
Is there a procedure to prevent certain raster charts from being auto selected, possibly just eliminating a particular chart from the overall set. I my particular location, on my E7, the particular...
View ArticleA22164 Adapter cable
Chuck, Thank you for the infmation to adapt my older S1 auto pilot to a new P70 control head by using a D244 junction block and a A22164 adapter cable. I have found the D244 block but having trouble...
View ArticleA128 Transducer Question
I am upgrading my vessels electronics by swapping out my C90W to an A128 (E70237LNC) w/ Chirp and need some help identifying the type of transducer I need. My vessel is a 2012, 250 EX admiral defiance...
View Article