HD Digital open array not rotating
I am troubleshooting a 4KW HD Digital 4' open array. Initially the VCM would not come out of sleep mode. The core was sent to Raymarine, a minor issue noted and repaired, and it was re-installed. The...
View ArticleClik here to view.
Networked Chart Data
Hello, I have just completed over the past weekend a new A95, A67 with a new RD418HD and HS5 network switch and Seatalk converter. I have confirmed that everything is talking as shown in this Diag dump...
View ArticleAxiom power/nema2000 cable
Is it possible to purchase an additional Axiom power/nema2000 cable so I can bring my unit home and connect a 12v power supply to it. I'd like to be able to edit my waypoints and routes directly on the...
View ArticleNeed a new Fishfinder to connect to my SL70RC
Quick question: I need a new fish finder/sounder to connect to my SL70RC. Something that would work with a "IN Hull" Transducer which I need as well. Nothing fancy.. Thank you in advance for your advise.
View Articlee95/Lighthouse questions
1. I set up a test race course with 3 marks. I then "started" the course. I had turned on Laylines in the MFD. As I approached the mark, I never saw any lay lines appear.
View ArticleDSM300 an B744VL
Hi, I have a DSM300 connected to my E90W MFD. The deucer is a B744VL. This was initially wired for a Garmin but the deucer was sent to me (aftermarket purchase) without any connector ends on it. I...
View ArticleSMART CONTROLLER ISSUES
Just received a warranty repaired controller. It has started to not recognize button inputs. Left or right turn commands are delayed after inputting. Switching to AUTO irvSTANDBY requires several...
View ArticleEngine data from MAN D0836LE401 to e127
Hello forum. I am interested in determining if it is possible to interface my MAN diesels, model D 0836 LE 401, model year 2004 to Raymarine 127 MFDs. From reading other threads, it appears that one...
View ArticleSirius wx Sr. 150 not detected
I have just installed the Sirius Xmas SR 150. The e97 mfd is not recognizing or picking it up. I have tried just about everything. The power lights are all showing green on the sr150. Any help would be...
View ArticleNo Navigation Data
I believe I may be experiencing the symptoms described here: http://forum.raymarine.com/showthread.php?tid=3007 Is the status in that thread still current, or has the EV1 update 2.18 addressed the issue?
View ArticleFusion Link capabilities via e127
Hello forum. I have recently installed a Fusion MS-UD750 and successfully networked it to two e127 MFDs via ethernet connection, but am disappointed that Fusion Link capabilities related to Sirius...
View ArticleNavionics Platinum Plus card tide/current symbols
I recently installed a es127 with Navionics Platinum Plus all went well except for the fact that I cannot find any Tide or Current symbols on the chart (it is in high detail mode). Any suggestions?...
View ArticleAIS650 Does Not Trasmit
I just had a marina install a new AIS650, and it has not worked since it was installed. The LED on the transceiver changes colors from red to yellow to green. The marina claims the VHF antenna requires...
View ArticleAIS Target Range
I just connected a Vesper Vision AIS to my E127. The two units are connected via NMEA2000 network. Two things are going on: The E127 indicates the AIS is in silent mode but the Vesper indicates it is...
View ArticleAutopilot looses calibration?
I have the ACU 200, EV1 sensor and type 1 linear drive installed on my 30 foot 7500 pound sailboat. I completed a sail from California to Hawaii with very good performance of the autopilot although...
View ArticleST7000 Not Functioning
I have an ST7000 in the pilothouse and an ST6000 on the bridge. The 7000 doesn't work unless the ST6000 is on "auto" and then only works in that mode. There is no steering from the pilothouse on...
View ArticleE127 wiring connection with Standard Horizon Gx2200
I would like to connect the Gx2200 using the 38400 Baud connections. I have the instructions to do that but I am confused by the Raymarine instructions since I also need some 4800 baud output for other...
View ArticleE120 and CP370
Just installed a new cp370 on my older E120 with a P66 transducer. Now my depth shows a reading of 5ft and the screen shows the bottom at 2ft. Is there a off set function for me to adjust the screen to...
View ArticleC80 with New RS130 Antenna
When connecting the 130 antenna via the seatalkNG conversion kit, can i power the converter off the present sea talk network rather than run a direct 12VDC line to the convertor? Presently the sea talk...
View ArticleTransducer compatibility question
Customer ordered a package from an online retailer which included an eS127 mfd along with what should have been a E66088 12 degree tilted element bronze thru hull transducer to plug directly in to the...
View Article