Axiom to BV744 Transducer
Is it possible to connect a BV744 Transducer to the Axiom 7 directly or can it be connected using a CP370 or CP470 module.
View ArticleRaycontrol for Iphone, Ipad
Having difficulty finding this app on the App Store. Found it for Android, but its not coming up for Apple Store. Can someone assist.
View ArticleX5R communication with chartplotter
I am installing a SmartPilot X-5R that I bought new several years ago and was not able to install at the time. I have connected a Lowrance HDS8 chartplotter using the NMEA 0183 connection as I want to...
View Articlees127 dock to dock not working
I downloaded the latest software. When i "build route" it does not show a dock to dock route, just a line pointing to the heading of my destination
View ArticleAxiom
I'm trying to decide to pull the trigger on the new 9" Axiom RV and have a few questions about the unit. When using the Real Vision 3D sonar does it have the capability to mark a way point on a...
View ArticleS100 No Pilot
My S100 remote connected to a base station connected to a ST to STNg gateway once or twice a day will show a no pilot message even though it shows connection to the base station and if "Standby" is hit...
View ArticleAxiom Chirp and Downvision images
I tested my Axiom this weekend and couldn't figure out why I was seeing fish using the Chirp screen, but not on the Downvision. I could see the bottom of the bay, but no fish. Is there a setting on the...
View ArticleEV-100 or EV-200
I have a 2007 320hp Mercruiser mx 6.2 MPI Bravo III MCM. I am trying to figure out which Autiopilot to purchase for trolling on the Chesapeake Bay. I will also connect it to my NMEA 2000 backbone which...
View ArticleVHF Ray 55 Receiver issue
I've got a (4 year old) Ray 55 that can transmit fine but does not receive signals. I've verified the transmit using a handheld and can communicate with other boats and bridges just fine. The problem...
View ArticleC80 HDG VECTOR adjustment
Can I adjust the HDG vector? Mine is reading 20deg off where the boat is pointing. The boat icon is off also. My COG Vector seems fine.
View ArticleAxiom 9 and RMK-10
We are planning to add an Axiom 9 to our binnacle location (48' sailboat). E and ES series MFDs (as I understand it) use the hard controls in case the touch screen isn't operable due to water...
View ArticleEngine temperature
My es78 reports my engine temperatures as being well above the Thermostat opening temperature. The thermostats are fully open at around 155° (measured with an accurate infrared thermometer at the...
View ArticleStuck Electrical Connector
I have a Dragonfly Pro 7 and I can't get the electrical connector on the back of the unit to unplug. I like to take the unit off the boat to avoid theft and/or possibly draining the battery. The knob...
View ArticleSPX5 wheel pilot
I have a 2010 SPX5 wheel pilot with C90W MFD and ST60+. The motor is not operating, the case where the cable connects is cracked. Question 1, can I get a replacement motor for this system, where and...
View ArticleRay 54 not transmitting
I bought a 1999 Pursuit 2870CC and it had a Raymarine Ray54 VHF radio in it. The radio receives fine, even out 25 miles from shore. Upon trying to do a radio check, the radio would kick down from HI...
View Articletransducer cable to helm identification
can you see the khz stamped on the cable. i need to know if my transducer is 120khz or 200khz
View ArticleAxiom
Greetings, I am slowly have to upgrade my legacy electronics. I added an A98 to run a CP570 depthsounder, Just replaced my 10KW radar with a new 12KW which I am controlling with the A98. My E120...
View ArticleTrouble with Sea Talking to Sea Talk Converter
As I had mentioned in another thread, after adding a Sea Talking to Sea Talk converter to my EV 200 pilot to communicate with my older Sea Talk devices it quit receiving data after working for several...
View Articlee127 Requiring Frequent Touch Screen Alignments
For the last year or so my display has been getting out of alignment more often. Last weekend I could not get the blue reset boat icon riding in the upper left hand corner to operate. No matter how...
View Article