Wheel not turning
We had the autopilot working through dockside calibration, then had to relocate the ACU and reroute the power and motor cables. Pilot now powers up, but when you press AUTO, you hear the clutch engage,...
View ArticleClik here to view.
Disappearing AIS targets
Last year we replaced much of our electronics. New instruments include Es95 MFD, Ray60 VHF, Raymarine Digital Radar. This is interfaced to our existing SmartPilot S2, and AIS 250. We also have a new...
View ArticleCan I use GPS without Navionics Card?
Hi all - Bought a Pro 7 with Nav+, promptly lost the Nav+ card. With the GPS feature, can I still use the chartplotter, and will it show me any detail on the US lakes? It seemed like it was not giving...
View ArticleAxiom MFDs are not compatible with the DSM300 and DSM30
Axiom MFDs are not compatible with the DSM300 and DSM30 Axiom MFDs are not compatible with the DSM300 and DSM30 50kHz/200kHz Digital Sonar Modules. Accordingly, it would be recommended that the...
View ArticleClik here to view.
RL70C Plus System Upgrade
I had the marina install the AIS650 and somehow they smoked either the Radome Scanner or the display. Apparently parts are no longer available, so the question becomes, what replaces the current...
View ArticleMIcro SD card extension
When flush mounting the Axiom 9 the miro sd slot is difficult to access. Does Raymarine offer an extension that can mounted on the dash and utilize the SD slot in the back of unit.
View ArticleClik here to view.
Seatalkng card reader
I think it would be a great idea to have a Seatalkng card reader so one could update software on various Raymarine devices without having to have a Raymarine MFD. Garmin has such a device that plugs...
View ArticleWaypoint name display
Greetings, On my old RM C90W the actual name of my waypoints were displayed on the chartplotter. On my new E125s I'm unable to figure out how to get the waypoint names to display on the chart. Thanks.
View ArticleConnecting two (2) Axiom9 MFDs
What cable, and/or other parts do I use to connect two (2) Axiom9 MFDs together ?
View ArticleClik here to view.
Almost Completed Axiom Network Question
I am in the process of installing my new Axiom network as is displayed in the attached PDF named AXIOM NETWORK. The attached JPEG named HELM is a photo of my installation of the two 9" Axiom MFD's, and...
View ArticleeS78 + Axiom not working
Hello all! I recently acquired a 9" Axiom plotter for the cockpit of my sailboat, to complement an eS78 I have at the chart table. They're interfaced via an HS5, along with a Quantum radar. However,...
View ArticleNew Axiom vs Dragonfly
I previously had a Dragonfly 7 and loved it. Unfortunately, I had to sell it because the transducer was too large for my 55lb thrust trolling motor. I know the new Axiom's have faster processors, touch...
View ArticleNavionics chip in e95
I have a Navionics chart chip from my previous B&G chartplotter. I have tried to use it in my new e95 which came with Lighthouse charts, but it does not seem to be recognized. Is there a way to get...
View ArticleE120 Fuel Used
I have Yamaha F250's connected to my E120 via a NMEA2k network. I get all of the engine data on my MFD, but can't figure out how to get the "fuel used" value to work. I get fuel burn, so presumably...
View ArticleCan an Axiom MFD be interfaced to an a/c/e/eS/gS-Series MFD?
Can an Axiom MFD be interfaced to an a/c/e/eS/gS-Series MFD? LightHouse II software does not support integration of a/c/e/eS/gS-Series MFDs within MFDs operating with LightHouse 3 software (i.e. Axiom...
View Articlelive sonar mapping
I currently have both the Lighthouse and Navionics + charts on my c127. I would like to start the live sonar mapping on my next trip out. Are there any advantages/disadvantages of one software program...
View ArticleSR50 Compatibility with A95
I was expecting limited performance from an existing SR50 weather receiver when viewed on a new A95 MFD - in particular the audio would not be available. While it does display marine text forecasts and...
View ArticleKeyboard beep alarm on G120
I have a pair of GPM-400s, with a compact keyboard hooked up via SeaTalkng. when the system starts up (there's a switch on the dashboard that powers the system), the 2nd GPM-400 (not the master) seems...
View ArticleNavionics
I recently purchased a boat with a pair of G120/GPM400 MFDs, which had a Navionics card for another part of the US. I bought a Platinum CF card and put it into the master GPM-400, and I'd like to know...
View ArticleVesper not talking over seatalk ng
Hi Chuck, I have hooked a Vesper 8000 AIS to my system via SeaTalk ng, using a DeviceNet adapter cable, but the GPM-400/G120 does not see the unit or receive AIS data. I have tried connecting the...
View Article