From Ray marines list...
- a list of the marine electronics products which are presently installed onboard the boat:
E120 (older generation)
Furuno Radar 1835
SIMRAD AP 28 Autopilot
I also have a RM A98 MFD that is NOT installed
- a list of the features/capabilities that you are seeking to add
I like the touchscreen and functionality of the A98 as well as the downchirp sounder so I would like to use that as a main unit...
- type of usage (serious fishing, cruising, offshore sailing, bay sailing, racing, etc.)
Fishing/Cruising.
- type vessel (displacement powerboat, planing powerboat, sailboat, etc.)
32 Blackfin Flybridge
- any physical constraints (ex. size of the display, desire for in-hull transducer, etc.)
None
- type of steering (cable, hydraulic, chain & sprocket, cable assisted hydraulic, fly by wire, tiller, etc.) ... a consideration for autopilots
Cable
- vessel length ... a consideration for depth transducers and autopilots
32
Anyways here is my situation.. I have the above installed and would like to stick with the newer generation A series stuff. If I were to install the A98 what else would I need other than a new transducer (I would like to switch to a Thru-Hull) I would need another display and probably a Radar. Any suggestions on which ones? Do I need a whole MFD (A98) or is there some type of stripped own "monitor" that would network with this to display things. How about networking, what type of extra stuff would I need to network two displays an a Radar (which I also need help chosing for this type of Vessel).
- a list of the marine electronics products which are presently installed onboard the boat:
E120 (older generation)
Furuno Radar 1835
SIMRAD AP 28 Autopilot
I also have a RM A98 MFD that is NOT installed
- a list of the features/capabilities that you are seeking to add
I like the touchscreen and functionality of the A98 as well as the downchirp sounder so I would like to use that as a main unit...
- type of usage (serious fishing, cruising, offshore sailing, bay sailing, racing, etc.)
Fishing/Cruising.
- type vessel (displacement powerboat, planing powerboat, sailboat, etc.)
32 Blackfin Flybridge
- any physical constraints (ex. size of the display, desire for in-hull transducer, etc.)
None
- type of steering (cable, hydraulic, chain & sprocket, cable assisted hydraulic, fly by wire, tiller, etc.) ... a consideration for autopilots
Cable
- vessel length ... a consideration for depth transducers and autopilots
32
Anyways here is my situation.. I have the above installed and would like to stick with the newer generation A series stuff. If I were to install the A98 what else would I need other than a new transducer (I would like to switch to a Thru-Hull) I would need another display and probably a Radar. Any suggestions on which ones? Do I need a whole MFD (A98) or is there some type of stripped own "monitor" that would network with this to display things. How about networking, what type of extra stuff would I need to network two displays an a Radar (which I also need help chosing for this type of Vessel).