4kw Open Array not connecting
The boat is new to me. Radar worked well on sea trials and subsequent runs. Finally brought it home Sunday and it worked perfectly for the 6 1/2 hr cruise home. I shut it down by depressing the standby...
View ArticleRadome and open array radar mounts
Radome and open array radar mounts Raymarine does offer mounts for its radomes and open array radar pedestals. However, radar mounts are produced by third party companies to support installaiton of...
View Article3rd Failed 18" Quantum wifi Radar
I just received my 2nd replacement Quantum radar and it failed to give a wifi signal out of the box. When it is powered on, I should be able to see it with the MFD or with a phone via wifi. I see...
View ArticlePurpose of VCM100’s Emergency Stop Connection
This post is concerning the purpose of the VCM100’s emergency stop connection. This application includes 4KW HD Pedestal (part number E52069E) receiving power directly from its VCM100 without switching...
View Articlecp300 software
I have an a78 MFD running v11.26 that will communicate with my cp300 and an a98 MFD running v17.46 that will not communicate with it. I would like to upgrade the a78 but will then loose my cp300. The...
View ArticleChanging Password
I couldn't find a better place to post this. I have a password now, and would like to change it, and can't find specific instructions.
View ArticlePossible converter cables ?
Hello, I purchased a Raymarine A128 earlier and it's working great. Thank you! I recently pick up a newer used model auto pilot head and I50. I want to replace my ST7000 and Tri Data. To better match...
View ArticleWi-Fish stuck in Simulator mode
Wi-Fish stuck in Simulator mode Wi-Fish will operate in Simulator mode when it is being powered and does not detect that a transducer has been interfaced to the product. This situation is commonly...
View ArticleBest way to interface two e127 units
I have 2 e127 screens, a Quantum radar, ev200 autopilot, and a b60 transducer. what is the best way to interface the 2 e127 units. Do I need an RAYMARINE HS5 or not?
View Articlea98 CPT 100, bottom view,
Hello, I have a a98 with a transom mount CPT100, On other Raymarine MFDs I was used to using 50kHz and 200kHz with a thru hull transducer Using 50kHz, the view of the bottom, the radius from...
View ArticleEV 100 connected to Garmin NMEA 2000 network
I have recently purchased and installed a EV 100 which replaced a 4000+ autopilot. I have Garmin chart plotter, windspeed/direction and boatspeed/depth instruments on a NMEA 2000 network. I have seen...
View ArticleAxiom HomePage Setting
Hi Chuck, I just received my Axiom 9 RV and excited to start using it soon out fishing. Do you know if the homepage background allows an option to apply your own picture? Like maybe a family picture or...
View ArticleA New GPS Which one?
Hi all: I am in the market for a new Raymarine GPS/depth unit maybe 7 inches or 9 inches ..Small = better for mounting in this tiny boat (1987 Crestliner Phantom 185) ........ Looking at a Dragon Fly 7...
View ArticleST60 wind, tested voltage
I have a ST60 wind instrument that is not working, I'm not sure if it is the wind vane or the instrument (gauge). It will not show direction of wind and will not linearize. I jumped out the instrument...
View ArticleClik here to view.
Raymarine Network Updated Diagram
After I posted my diagram for my new Raymarine Axiom network yesterday I realized the connection between the iTC-5 and i70s and backbone was not correct because I didn't understand the connectors...
View ArticleSR6 compatability with Fusion AV750
I have an existing SR6 installed on my boat. I have just purchased a Fusion AV750. The SR6 has multiple (6) Ethernet connectors. The Fusion has a satellite radio male connector that appears to be...
View ArticleC80 magnetic variation
Hi, I have a C80 MFD running v5.16 software and networked to ST60 wind, speed, depth, a i70, ST6000 Autohelm and 120 GPS sensor. The C80 is set to display magnetic bearings. Each time the MFD is...
View ArticleClik here to view.
Adding SiriusXM Satellite Radio features to a Raymarine system
Adding SiriusXM Satellite Radio features to a Raymarine system While use of the SiriusXM Satellite Weather features of a Raymarine MFD requires that the MFD be interfaced to a compatible Raymarine...
View ArticleRadar replacement
My 10KW legacy radar has stopped receiving. Don't want to chase good money after bad so I guess it is time to replace. I want a radar that will clearly mark birds. Currently have a 6' array. Control...
View Article