ITC-5 speed calibration failure
I just replaced my A22154 triducer. The initial symptom was speed quit. Temp and depth worked fine. Speed LED on ITC-5 blinked, never went on hard. Had been working solid for two years. Replaced the...
View ArticleClik here to view.
Voyage Planner 1.3.0.11
In the Routes tab I have created additional folders to the default folder "My Routes". I have attempted to change the My Routes folder name to something else which it seems to do BUT if I close the...
View ArticleE92130 RD418D Raydome
Will the RD418D Digital Raydome work with the new Axiom Displays?
View Articleexpedition software with raymarine
I currently have a STng network with raymarine wind, depth, speed sensors, i50 depth, i60 wind and CH, i70(2), e95(2), EV-1 auto pilot. I added an actisense NGT-1 USB with a STng cable adapter to...
View ArticleMaximum Number of Characters for waypoint and route names.
I have an aSeries MFD on my vessel. What is the max character length for waypoint, route and folder names? The boat is being serviced and I can't check this at the moment. It is running Lighthouse II...
View ArticleVoyage Planner where are waypoints, and routes stored on the computer.
Where in the file structure are the Charts, Waypoints and Routes stored. I have put in quite a bit of information in Voyage Planner (830 Waypoints, 7 charts, and 26 routes. I would like to know where...
View ArticleQuestion on what cable comes with the 18" HD Dome
I am trying to determine what cable comes with the T70168 18" HD dome. Is there a Raynet 10M cable packaged with this unit?
View Articlecpt 120 transducer
when installing the transducer, is it necessary to use the plastic speed block?
View ArticleClik here to view.
E70153 as a start to a growing system
Hi. I bought the E70153 wind/speed/depth package utilizing i50 and i60 displays. It comes with short Seatalk cables only - no power or backbone. It is the start of a system that eventually will have a...
View ArticleA06074 in-line terminator
Is the purpose of the in-line terminator, part A06074 to act as a terminator of the backbone but permit a seatalkng spur to connect? In other words, can be substituted for a A06031 terminator and...
View Articlewi-fish wiring?
wi-fish wiring? I have three wires from the wi-fish they are unlabeled (except for a yellow lable that says all are positive) then are numbered in the instructions. one is red is this positive 12V DC?...
View ArticleSubstituting blanking plugs
I have two empty spur ports (white) on my Seatalk NG system to plug and I happen to have two blue backbone plugs left over. Can I use the blue plugs in the white ports?
View ArticleTacktick wind malfunction
Hi, My S/Y is fully equipped with Tacktick wireless Instruments. Already since a while the transmission of wind-data between the masthead unit and the MN100 Display showed disruptions from time to...
View ArticleClik here to view.
Skeeter boat / DragonFly transducer location
This is my first newer style Finder . I purchased 2 Dragonfly pro 7 . One for the trolling motor the other for the driver seat. My b oat is a 1988 Skeeter SF175SX. Wow these new transducer long. Please...
View ArticleNavionics maps question
Does anyone have a list of dealers that carry the Navionics maps cards in Pennsylvania and Maryland? I have an E-120 chartplotter
View ArticleNIB A65 (classic)
So I have a NIB A65. I got off the phone with Navionics - This is on its Obsolete list now. I read a thread from 2013 that Navionics + would work with it. I would like this unit with usable maps, but...
View ArticleM81202 Actuator - Rudder Stop Parameters
The manual states that the rudder stops are to be reached before the cylinder reaches the end of either stroke. I am installing new stops but would like to know what the design minimum is for the...
View Articlees75 display settings
I am curious about two really specific things in the es75 display. first of all, can the screen be split into multiple regions for say a chart plotter map on one side and a wind machine display on the...
View ArticleClik here to view.
ES128 Trip "Odometer"
Trying to figure out why the Gnd trip and trip are different? They were both reset to "0" prior to my trip offshore yesterday and this is what they read when I returned..... The boat has chirp...
View ArticleL1250 Fish Chart
Anyone have any idea why my sea temp hAs decided to reat 126 degrees? Cleaned up and lubed the cable coming into the insturment, no change.
View Article