[CA11] Fusion MS-BB100 to Raymarine es98
I'm looking to tie a Fusion Black Box unit to a new Es98 to be able to utilize the controls from my Es98 mfd. Can anyone explain to me where to start and what I may need to get this up and running....
View Article[CA11] Axiom 7 Low Voltage
Axiom 7 Quits reading structure and chirp when sitting still with engine off I get a warning Low voltage transducer then it shuts down Any ideas
View Article[CA11] RV-200 transducer with Axiom Pro
I have a Axiom Pro installed and just added a RV-200 transducer. I have the latest software for my Axiom, but it is not seeing the transducers. I’ve recycled the power and still nothing. How can I test...
View ArticleClik here to view.
[CA11] Apelco 360 problem
Hello folks, these are pics of my Apelco 360 that has come apart & i am hoping that someone out there on this forum can tell me how to put this back together or what is missing. The 3 screws are...
View Article[CA11) Interfacing AIS350 with Axiom 9
How do I connect the AIS350 (receive only) to the Axiom 9? I have the PWR/Data cable attached to the AIS350 input (other end of the cable is 12 colored wires - NMEA 0183). I'm assuming I don't need to...
View Article[CA11] warranty registration
Just curious, I just filed for a rebate for the trade up program for the Axioms. Do I need to also file a registration too?
View Article[DG11] Axiom Pro RVX and Axiom Pro on same system
Please confirm that when installing a system with three MFDs, all Axiom Pro units, two 12" and one 9", that only the MFD that has the transducer plugged into it need to be the RVX version with internal...
View Article[DG11] Adding an RMK10 to two axioms - switch not powering on
Hello Trying to add a RMK10 to my setup. I have two axiom 9's a Raymarine HS5 network switch an RMK -10 keyboard I connect the two axiom network outputs to the HS5 (port 1&2) I connect the RMK to...
View Article[DG11] Axiom Pro mods show own boat as target
We have two Axiom Pro MFDs and since applying a recent software update we now see our own boat as an AIS target which never happened previously. Our AIS transponder is a Vesper Marine 8000 and we have...
View Article[DG11] Smart Pilot LTP13
From the Smart Pilot Service Manual: "Rate gyro 1. Using a DVM, measure the voltage at the rate gyro output (LTP13). If the rate gyro is serviceable, the nominal reading is 2.5 V ± 0.3 V." Where is LTP13?
View Article[CA11] Micro SD to Compact Flash Reader
I have a Raymarine E 120 MFD and I want to buy Navionics charts for the South Pacific for it. However, Navionics do not appear able to supply this chart on a Compact Flash. I understand that Raymarine...
View Article[CA11] Plugs and General Wiring
Hi, I am wonder if it is possible to buy new termination plugs for your Raystar GPS units... Years ago I connected my unit to a Seatalk1 junction box (removing the Seatalk NG connector)... I am now in...
View Article[CA11] Replace A77 with Axiom 7 surface mount
Hello, I have a surface mounted A77 that I want to replace with a Axiom 7 I have, will I need any conversion plates or is it a simple out and in job. The boat also has a P79 Transducer, can I rig this...
View Article[CA11] No wind speed
We have a very simple network which worked sufficiently for just under three years. One I-70, one chartplotter, one depth transducer Airmar, one wind vane/ananometer EE22078, on a backbone 5 way...
View Article[CA11] eS78 Speed issue
Just installed a new eS78 and have a few issues i cannot seem to resolve. I have set the 2nd databox to read SOG and also edited the main databar to show SOG. But still i get no speed reading. Any help...
View Article[CA11] MFD upgrade from E127 to gS165
I am upgrading from a e127 MFD (2013) to a gS165 MFD with Lighthouse II. Can I just replace the old GPS with the new RS150 GNSS and then plug in the existing wiring from the old unit to the new unit? I...
View Article[CA11] Using iPad with Axiom 7
What Apple iOs version is necessary to link Axiom 7 RV via bluetooth with iPhone and iPad? Does the Raymarine Axiom link software work with iPad running iOs 9.5.3? What are the iOS capabilities and...
View Article[CA11] Sirius radio on E120
I have Sirius weather on my boat. I'm not sure if I have the SR50 or the SR100. I tried to look on the receiver, but it's buried behind the refrigerator under the helm. I was able to get the weather to...
View Article[DG11] E120 - Seatalk2 AIS Receive
Hi I need to connect an AIS (Both 0183 & 2000 out capable) unit to an E120 where the 0183 port is already taken and set to 4800 for GPS out to a VHF. So I can't change this to 38,400 for AIS In....
View Article[DG11] C120 Engine information
I am thinking through how to connect and display engine information on my C120 (plotter) from twin Volvo Penta D4-260A-C diesels. If I understand things right (not certain about this!) then I need: 2 x...
View Article