Clik here to view.
Multi Generation Network
I currently have the auto pilot and eS127 shown in the network diagram attached. The eS127 is not currently connected to the SeaTalk network. I likely have some errors on how the current SeaTalk...
View ArticleClik here to view.
[CA] seatalkng upgrade
replacing all my electronics this season. Attached is a proposed system diagram. The MFD and the pilot control are on the pedestal of this 37' sailboat. You will note three options for tying in the MFD...
View Article(DG) WI-FISH Firmware updates unavailable
Updates have been unavailable since I bought this unit a few months ago. I need the update for this paperweight ASAP as spring is approaching rapidly here in the midwest. If you do not plan on...
View Article(DG) ST60+ Replacement
I would like to replace my existing ST60+ with a new i70s. Is the round cutout the same for the two units?
View Article(DG) e7 card reader problem
I have an e7 MFD, running latest software (19.03). Yesterday I found that my Navionics chart was not being read - the chart display shows only the generic map. I took the map card out and tested it in...
View Article(DG) Instrument Upgrade
I am have an a750 connected to a EV-100 wheel pilot. I need to upgrade my wind and depth instruments. My thoughts are buying the i70 with depth and wind transducer. Will I be able to connect the i70 to...
View Article(DG) LH3 Update
Hi - any update on when LH3 will support the chart measurement ruler, SAR patterns and waypoints on radar?
View ArticleBest practices for chasing electronics power and comms cables in a sailing...
Best practice for chasing electronics power and communications cables in sailing vessels Sailing vessels can prevent some challenges with regard to chasing cables, particularly when it comes to chasing...
View Article[CA] Instrument Upgrade
I have an a75 MFD without sonar, and I'm looking to upgrade my sonar and wind instruments. I'm looking at the i70 display with wind, depth, and temp transducers. Will this talk to the a75 with Seatalk,...
View Article[CA] Axiom to Es
I recently upgraded my ES unit to the Lighthouse 3 software. I liked the ease of use so much that I decided to upgrade my A series unit to an Axiom. My question is can I use the same sea talk ng cable...
View Article[CA] eS128
Hi Chuck Can you please tell me what the part number is for the rubber sun cover for an eS167? I managed to find the number for the plastic version however I need the rubber version. Thanks very much.
View Article[CA] Axiom Auto Track
I recently upgraded to 3.3.170. I have "auto track" turned on. It seems since upgrading to this build I get a track point inserted before the GPS has a valid LAT/LON, hence everytime I turn off and...
View Article(DG) AIS650 and Es127
Does the AIS650 need a dedicated GPS antenna, or will the internal one on the MFD suffice.
View ArticleClik here to view.
(DG) Replacing early style masthead Wind transducer
I don't know why this thread was closed, there are plenty of questions for these old instruments! I talked to a Raymarine rep and was told the R28170 would plug right in to my old Autohelm mast top...
View ArticleRaymarine Package with new Azimut 50 Fly
Hi, I am buying a 2018 Azimut Fly and it comes with a Raymarine package: 4 a125-two on fly, two at inside helm 2 VHF 260- one on fly, one at inside helm ACU 300 EV-1 2 p70r 2 i70 DST800 VCM 100 HS-5 2...
View ArticleAIS650 GPS antenna
The AIS 650 must have its own dedicated GPS antenna connected direct to it in order to transmit vessel details, it is a requirement of CLASS B AIS systems. This dedicated GPS antenna will not interfere...
View Article[CA] transducer for E97 MFD
Which transducer would be best fit for my 2003 Mainship 430 aft cabin trawler? Greg
View Article[CA] ST6001+ Replacement
What would be the recommendation(s) to replace a functional but display-compromised ST6001+ AND a non-functional ST600R wired remote (both unreparable per factory service). System configuration and...
View ArticleReplacing ST50 or ST50+ masthead Transducer
The original masthead wind transducer used by the ST50 range has not been available for many years, it's part number was D168 and was identified by the vertical tube at the outboard end and the angular...
View Article[CA] Auto pilot course computer changeout
I recently replaced my type 300 computer with a new to me one and while functionally it works fine, both the computer and my C120 mfd s how a heading that is 180 degrees out. Also, the mfd chart is...
View Article