[CA] Cabling for e120 Classic
I need the proper cables to interface AIS and XM Sirius to MFD E120 Classic. I have the following: SAR 50 Antenna and SRX150 XM radio RS130 Antenna E120 Classic MFD I need 1. The power cable for the...
View Article[CA] Axiom Pro RVX with M265 LM
Configuration: One Axiom Pro RVX connected to one M265 LM. When the display is set to view both low frequency and medium frequency CHIRP, are both L and M frequencies pinging at 1KW each or are they...
View Article[CA] Erratic sonar readings
Advice/help required.. Fitted a new Raymarine E97 MFD a few weeks ago along with a new transducer (P48) - today was our first trip out to sea, MFD was great but the sonar readings were awful. Plodding...
View Article[CA] Mystery solved locating imported Navionics + routes from Android tablet...
Over the weekend, after many hours of trial and error and trips to the boat and calls to Navionics and Raymarine for help, we finally found the puzzle key to moving dock to dock autoroutes created on...
View Article[CA] 3D Thru-Hull Split Pair Transducer
When installing Rv-220P and RV-220S transducers on a hull that has 18 degree deadrise angle, is it necessary to mount them with wedges or blocks, or are they designed to accommodate the angles ?
View Article[CA] Wiring for EC 200 autohelm
I'm installing an EV 200 autopilot on a 35' sailboat. The P70s Pilot controller will be mounted on a pod above the wheel. Can I use the longer seatalk "Backbone" cable connected to the controller, run...
View Article[CA] Yellow-plug SeatalkNG to SeaTalk Auxiliary Junction Box
Hello I'm looking at doing a similar setup as presented in http://forum.raymarine.com/showthread.ph...+RAYFAQ%23 So basically bridging my SeaTalkNG network (most of my components, including an ICT-5)...
View Article[CA] Axiom Anchor Alarm
I am interested in using the anchor alarm feature of my Axiom. My question is, how much power draw does the Axiom use per hour? Leaving it on while anchored, using battery power is the concern. I...
View Article(DG) Erratic problem with Linear Drive 2S - clutch disengage without warning.
Hello I have a weird problem with my autohelm… From time to time, typically after 60-90 minutes of using the autohelm, the clutch disengage without any warning or error message on the MFD or control...
View Article[CA] Axiom 9 with Seatalk-SeaTalkng converter
I have switched on my new Axiom 9 (3.3.170) together with my new ST1 STNG converter at home - before installing it in my boat. Converter has power connected - LED on (no blink), Axiom connected to...
View Article[CA] Man Overboard (MOB)
I marked some Wps using MOB feature on my MFD. I can see the WPs I marked on my MFD. I selected the MOB WPs on my MFD and moved them into one of my folders. I exported all routes and WPs to a sd card...
View Article[CA] Can't shut off Axiom 9" running v3.3
I recently upgraded to v3.3 on my 9" Axiom (not the pro) and have had this happen now 5 separate, different times. I am unable to swipe the power icon at the bottom of the screen and get the on-screen...
View Article(DG) Replacement EV-1 mounting parts
I accidentally broke a couple tabs on the top piece of the white EV-1 sensor core ring when i was moving it to my new boat. It looks like the wall mount is readily available online but I cannot find...
View Article[CA] i50 Depth unknown symbol
Sometimes a symbol flashes on the screen of my i50 Depth display. It looks like \./ or /'\ I can't find any reference in the manuals or on-line what it means.
View Article[CA] Upgrading and connecting Raymarine instruments to Garmin 7610 MFD
(Great forum!) I got a used sail boat that has the following configuration: - Garmin 7610 MFD - Garmin 18 HD Radar The above are not connected to the Raymarine components, which are: - ST60+...
View Article[CA] Wireless wind to Axiom via Micro-Talk Gateway
I’m thinking of expanding an existing Raymarine/TackTick wireless system that has: - Speed/depth transducers with hull transmitter (T121) - Dual display (T111) - Racemaster (T070) Specifically, I’d...
View Article(DG) EV-100 Wheelpilot / NMEA 2000
Have purchased a new EV-100 Wheelpilot. Already have installed a NMEA 200 backbone supporting wind, speed, depth, and chartplotter (all Garmin). I believe I understand the Wheelpilot may be connected...
View Article[CA] CP370, TM258
Have recently installed a TM258 (3months ago) and replaced a DSM 300 with a CP 370 (6 weeks ago) running on a e140W. Everything has been running good (Numerous trips)before yesterday. Yesterday loss...
View Article[CA] Lighthouse 3 upgrade
I have an ES97 that I would like to upgrade to Lighthouse 3. My connected devices are not all on their latest versions of software. In the past, the MFD install would also upgrade all connected devices...
View Article[CA] Axiom 9" on LH 3.3 with Fresh Water PGN
I hooked up a Antisense today which sends fuel level (PGN 127505) for both my fuel tanks. I also am trying to send Fresh Water level (also PGN 127505) but a different ID. I can see the sentences on the...
View Article