Hi,
When using the SonarChart live (Axiom7,RV-200), the depth offset doesn't work as i would like it to do.
The Depth on my DST800/i70s is calibrated to "below keel", offset of 1.7m.
This shows as my current depth, in 2.0m water as 0.3m.
When using SonartChart live, this will show up as "deep red", as it thinks the depth is 0.3m, when i really is 2.0m
The workaround is the to set the offset to 0, so the SonarChart live, shows a "normal" depth. Ofcourse, the depthtransducer is really 0.2m below the waterline, but i am unable to set the offset to -0.2m
The real problem, is that this new depth offset setting (of 0.0), is confusing the Admiral. So either i have a working SonarChart Live or a very confused Admiral.
How to fix this? (Getting a new Admiral is not really option)
When using the SonarChart live (Axiom7,RV-200), the depth offset doesn't work as i would like it to do.
The Depth on my DST800/i70s is calibrated to "below keel", offset of 1.7m.
This shows as my current depth, in 2.0m water as 0.3m.
When using SonartChart live, this will show up as "deep red", as it thinks the depth is 0.3m, when i really is 2.0m
The workaround is the to set the offset to 0, so the SonarChart live, shows a "normal" depth. Ofcourse, the depthtransducer is really 0.2m below the waterline, but i am unable to set the offset to -0.2m
The real problem, is that this new depth offset setting (of 0.0), is confusing the Admiral. So either i have a working SonarChart Live or a very confused Admiral.
How to fix this? (Getting a new Admiral is not really option)