a/c/e/eS/gS-Series MFDs not sharing cartography, radar, fishfinder, satellite weather with one another
Within a system of a/c/e/eS/gS-Series MFDs, it is important that each MFD within the system be running the same version of software, preferably LightHouse II v19.03. Of the system's MFDs, one of the MFDs will be interfaced to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone should there be a SeaTalkng / NMEA 2000 backbone installed onboard the boat. This MFD will then need to be designated as the system's Data Master MFD. The function of the system's Data Master MFD is to bridge data from the system's SeaTalkng / NMEA 2000 backbone to the system's Ethernet communications network from which the system's other MFDS will access this data. Cartography, radar, fishfinder, SiriusXM satellite weather/radio, IP camera, thermal camera, and Fusion 7xx Series Stereo resources are also designed to be shared between the MFD's via the system's Ethernet communications network. Depending upon the model of a/c/e/eS/gS-Series MFD, each MFD will feature one, two, or three Ethernet communications interfaces. Should the system's MFDs not feature a sufficient number of Ethernet communications interfaces to permit MFDs and peripherals having an Ethernet communications interface to be networked to one another, then a HS5 RayNet Network Switch(es) would need to be installed to provide the additional Ethernet interfaced required to network the products. Raymarine Ethernet networking cables, adapters, and accessories may be found on [url=http://www.raymarine.com/view/?id=5537[/url].
RAYFAQ#
Within a system of a/c/e/eS/gS-Series MFDs, it is important that each MFD within the system be running the same version of software, preferably LightHouse II v19.03. Of the system's MFDs, one of the MFDs will be interfaced to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone should there be a SeaTalkng / NMEA 2000 backbone installed onboard the boat. This MFD will then need to be designated as the system's Data Master MFD. The function of the system's Data Master MFD is to bridge data from the system's SeaTalkng / NMEA 2000 backbone to the system's Ethernet communications network from which the system's other MFDS will access this data. Cartography, radar, fishfinder, SiriusXM satellite weather/radio, IP camera, thermal camera, and Fusion 7xx Series Stereo resources are also designed to be shared between the MFD's via the system's Ethernet communications network. Depending upon the model of a/c/e/eS/gS-Series MFD, each MFD will feature one, two, or three Ethernet communications interfaces. Should the system's MFDs not feature a sufficient number of Ethernet communications interfaces to permit MFDs and peripherals having an Ethernet communications interface to be networked to one another, then a HS5 RayNet Network Switch(es) would need to be installed to provide the additional Ethernet interfaced required to network the products. Raymarine Ethernet networking cables, adapters, and accessories may be found on [url=http://www.raymarine.com/view/?id=5537[/url].
RAYFAQ#