Welcome,
in Short stories, we are trying to restore half sunked Lagoon 620 after huricanne Irma.
Bout we encounter few issues, and right now im focusing on finding solutions for it:
orginal configurations consist
Navdesk Chartplotter cS connected to HS-5
T series camera conected to HS-5 and analog to Navdesk plotter
Fly Bridge Chartlotter cS connected to HS-5
two docking analog CAM100 cameras connected to Fly Bridge
System incorporate also Didital radome on HS-5
So HS got 4 occupied ports
Due hurricane and after hurricane lootings we lost one docking cam, and both chartplotters. And desperately tring to restore functionality. But right now we got one chartplotter Axiom-9 at nav desk. And looking for solutions for it. T series thermal camera have two outputs HS- for thermal lens and analog for day view. But Axiom9 did not have Analog input. During desearch i found video module for G-series GVM-400. Witch supose to be Analog to Digital converter.
Did that module is still availabale
Did that module allow transmit analog signal from thermal Camera to Axiom-9 thru HS-5. or better solution is replace it with Axiom pro with analog input?
If not, did Raymarine have alternative modules that could provide us analog video connectivity betwen T-series and axiom??
Two docking camera CAM 100. one is lost, and can be replaced, but all modern curent chartplotters got only one video input, how to solve it??
Did taht GVM-400 module can do work for us???
Or you suggest ad on more HS-5 and swap to Ip cameras??
Did HS-5 provide PoE for CAM200IP, or cams need to have on power on pigtail?
If i stack two HS-5, did both of them need to have own red cable power source??
What type of connecter is on CAm200IP pigtail is RJ45 or raynet??
hmm i think it all my toughts right know, I would be happy for explanation and help.
Best Regards,
Martin
in Short stories, we are trying to restore half sunked Lagoon 620 after huricanne Irma.
Bout we encounter few issues, and right now im focusing on finding solutions for it:
orginal configurations consist
Navdesk Chartplotter cS connected to HS-5
T series camera conected to HS-5 and analog to Navdesk plotter
Fly Bridge Chartlotter cS connected to HS-5
two docking analog CAM100 cameras connected to Fly Bridge
System incorporate also Didital radome on HS-5
So HS got 4 occupied ports
Due hurricane and after hurricane lootings we lost one docking cam, and both chartplotters. And desperately tring to restore functionality. But right now we got one chartplotter Axiom-9 at nav desk. And looking for solutions for it. T series thermal camera have two outputs HS- for thermal lens and analog for day view. But Axiom9 did not have Analog input. During desearch i found video module for G-series GVM-400. Witch supose to be Analog to Digital converter.
Did that module is still availabale
Did that module allow transmit analog signal from thermal Camera to Axiom-9 thru HS-5. or better solution is replace it with Axiom pro with analog input?
If not, did Raymarine have alternative modules that could provide us analog video connectivity betwen T-series and axiom??
Two docking camera CAM 100. one is lost, and can be replaced, but all modern curent chartplotters got only one video input, how to solve it??
Did taht GVM-400 module can do work for us???
Or you suggest ad on more HS-5 and swap to Ip cameras??
Did HS-5 provide PoE for CAM200IP, or cams need to have on power on pigtail?
If i stack two HS-5, did both of them need to have own red cable power source??
What type of connecter is on CAm200IP pigtail is RJ45 or raynet??
hmm i think it all my toughts right know, I would be happy for explanation and help.
Best Regards,
Martin