I installed the Raymarine system that you helped my configure as defined by this thread: http://forum.raymarine.com/showthread.php?tid=2945 Everything has worked perfectly since the install a month ago.
During the configuration I decided to use the A80489 Adaptor Cable to connect to my existing DSM 300 w/B744V through-hull sonar transducer so that I could save the pull out of my 40' trawler. I plan change to the newest through-hull transducer on my next pull out. for the last month I have not had depth, speed or sonar so I eagerly awaited the release of the A80489 Adaptor Cable.
A few days ago I installed the cable. It installed easily between the 25 pin Axiom 9 RV 25 pin Transducer receptacle and the 8 pin Airmar (CP370 style connector) transducer cable. Note: I did the latest update to Lighthouse software version 3.0.66 at the same time (see attached photo).
![.jpg]()
IMG_1049.JPG (Size: 74.54 KB / Downloads: 1)
![.jpg]()
IMG_1031.JPG (Size: 83.72 KB / Downloads: 1)
![.jpg]()
IMG_1038.JPG (Size: 109.77 KB / Downloads: 1)
During the configuration I decided to use the A80489 Adaptor Cable to connect to my existing DSM 300 w/B744V through-hull sonar transducer so that I could save the pull out of my 40' trawler. I plan change to the newest through-hull transducer on my next pull out. for the last month I have not had depth, speed or sonar so I eagerly awaited the release of the A80489 Adaptor Cable.
A few days ago I installed the cable. It installed easily between the 25 pin Axiom 9 RV 25 pin Transducer receptacle and the 8 pin Airmar (CP370 style connector) transducer cable. Note: I did the latest update to Lighthouse software version 3.0.66 at the same time (see attached photo).
IMG_1049.JPG (Size: 74.54 KB / Downloads: 1)
IMG_1031.JPG (Size: 83.72 KB / Downloads: 1)
IMG_1038.JPG (Size: 109.77 KB / Downloads: 1)