Setup:
I have an e127 MFD with Sonarcharts enabled and running that's connected to an older Seatalk depth sounder, via a Raymarine Seatalk-NMEA2000 converter.
My ST60 Tridata is set to show depth under the keel (sailboat).
The problem:
The system doesn't seem to be able to offset the depth of the sensor.
The live readings in the MFD shows the depth under the keel (that's offset by 6.4ft in the ST60 Tridata). Here in Bahamas that means my charts are now clogged up with red blurs.
I have figured out how to turn off the live reading in the charts but I'd love to be able to have the Sonarchart live show correct depth.
Question:
Is there a something I can do to counter the ST60 depth offset?
I have an e127 MFD with Sonarcharts enabled and running that's connected to an older Seatalk depth sounder, via a Raymarine Seatalk-NMEA2000 converter.
My ST60 Tridata is set to show depth under the keel (sailboat).
The problem:
The system doesn't seem to be able to offset the depth of the sensor.
The live readings in the MFD shows the depth under the keel (that's offset by 6.4ft in the ST60 Tridata). Here in Bahamas that means my charts are now clogged up with red blurs.
I have figured out how to turn off the live reading in the charts but I'd love to be able to have the Sonarchart live show correct depth.
Question:
Is there a something I can do to counter the ST60 depth offset?